Can't find what you're looking for?
Official
Accepted
Unanswered
Advanced Filters
Search Results (1.1K)
Your second "proposed" diagram looks fine (with one adjustment*), assuming that the MoCA adapters you choose include a RF pass-through port; if not, you'd need to use a MoCA 2.x-compatible splitter** at the modem location to get both the modem and Mo
MoCA setup diagram and Questions
I am looking for confirmation on a seemingly very simple internet setup with my Xfinity internet. I am curious if using MoCA will be possible in my scenario. Per my diagram provided, I have two possible questions: (modem does not have MoCA technology) 1) Do I need two MoCA adapters in my current sce
Question
@Medic956 wrote: I'm an Xfinity customer with the supplied Netgear router. I am not using the MoCA functionality internally as I could not get it to work. Please help me with this setup. Outside cable goes to POE filter to splitter (MoCA compatib
MoCA Setup
I'm an Xfinity customer with the supplied Netgear router. I am not using the MoCA functionality internally as I could not get it to work. Please help me with this setup. Outside cable goes to POE filter to splitter (MoCA compatible). From the splitter I have a Motorolla MoCA adaptor setup as prescri
Question
Cannot disable MoCA on the XB7 once it is enabled. The point of entry (POE) filter also reflects the MoCA signal back to the house wiring, so you have a stronger signal which can equal more MoCA speed.
XB7 cannot run Pods and MOCA
TL; DR Comcast XB7 (Technicolor CGM4331COM 2.0) cannot simultaneously support xFi Pods (single gigE model) and MOCA (Actiontec ECB6200). The MOCA link drops anywhere from a few seconds to a few minutes and the Pods frequently re-mesh. Unplug either all the Pods or all the MOCA transceivers and all e
Question
Try disabling MOCA within the gateway settings Under Connection MOCA - disable
Device randomly gets paused, but Xfinity app says it isn't paused.
A few days ago I manually paused one of the devices on my home network. I set it to pause until I unpaused it. The next morning I unpaused it, and everything seemed to work just fine for 4-5 hours. Then, suddenly, the device lost all internet access and I started getting web pages telling me that my
Question
If a Comcast store isn't convenient MoCA PoE filters are like $10 on Amazon. I'd say if you can disable MoCA on the gateway do so until you can get a filter and just put up with any MoCA devices you have not working until your filter shows up. Yo
Dozens of Unknown Devices
I have had Xfinity for around 4 months and everything was working fine until now. Over the last two weeks I have had dozens of unknown devices (Apple devices, Amazon speakers, etc) all connecting to my gateway via MoCa or wired connection. My internet reliability has plummeted and it’s hardly usable
Question
This could possibly be a MoCA connection. MoCA is basically ethernet over Coaxial. Aside from the latest version it doesn't have any built-in security and a lot of combo cable modem + WiFi router units support it including Comcast gateways.&nb
a new device has joined your home network
Hi - I have been receiving this message every 3 days or so via email. I can see the device logged in, but cannot determine how to block this MAC address from logging in? The MAC is the only constant, besides it's a generic brand of computer running Windows 10. I am able to pause the device, but do n
Question
Another option may be to try using MoCA adapters. Google MoCA for more information.
get my tv directly connected to the internet
Hello, I have the fastest internet speed offered. I do not have cable services, but I am streaming Netflix, Hulu, etc. and my TV keeps getting stuck. It's very hard to watch a show because it keeps stopping. All of my other devices in the home work fine. The TV is downstairs while the wifi router is
Question
@Medic956 wrote: The diagram has the cable entering the MoCA adaptor and then continuing to the router, not the other way around. Can you post a .jpg or .gif or link to a document with that diagram? What model modem/router do you have which you im
MoCA Setup
I'm an Xfinity customer with the supplied Netgear router. I am not using the MoCA functionality internally as I could not get it to work. Please help me with this setup. Outside cable goes to POE filter to splitter (MoCA compatible). From the splitter I have a Motorolla MoCA adaptor setup as prescri
Question
I suppose I could have been a bit clearer on that. Anything using MoCA needs to have a filter between it and the outside world. The filter isn't necessary if nothing that has MoCA enabled has a path over coax to the outside world. If you
Moca Install with Netgear Modem and Mesh Network (Internet Only)
Hi All, I have a NETGEAR Modem, NETGEAR Nighthawk mesh network. Have Internet only plan. I bought a couple of MOCA 2.5 adapters and a POE filter. Trying to figure out how everything gets setup. Since I am not using Cable TV boxes, can I install the POE filter onto the Cable going into my modem? Do I
Question
Thanks @kf08844, I appreciate the details. Do you happen to know if the WiFi Boost Pods are connected to the modem via Ethernet for Ethernet backhaul to provide a more reliable and faster connection? Also, with the third-party MoCA adapters, one sho
WiFi connections show as "wired" in Xfinity App
We have two Pods as well as MOCA turned on for our network. There are multiple devices that show as "Wired" on the Xfinity App that obviously aren't wired. i.e. an iPhone is not a wired connection no matter how you slice it. But the app is showing as Wired. I suspect somehow it is getting mixed up w
Question
How do you have this configured? Is the only thing on the coax the two MOCA adapters, one at each end, or are you sharing the coax with the modem? Ideally you just want the two MOCA adapters and the coax in between them. Ethernet from yo
MoCA Connection in 2nd Room
I am having trouble setting up a MoCA connection and Wireless Access Point in my home. The WAP uses an ethernet connection therefore I am working to use a MoCA adapter to get a connection. There are only coax drops in my home, and I am attempting to boost my signal for consistent coverage. MoCA Adap
Question
I'd suggest MOCA adapter(s). I currently use 2 MOCA adapters with my own modem to get wired ethernet speeds to a lower level of the house. Wifi from upstairs office to basement was spotty. I believe most recent XFi gateways support MOCA
Internet to detached garage/office
Hello, I am trying to get internet from my house to a garage/office I have about 70 feet from my house. I only subscribe to xfinity internet service in the house and have a XFi Gateway (router/modem) and one Pod extender installed there. I tested the Pod at the garage and do not get enough WIFI sign
Question
Accepted Solution
An MoCA POE (point of entry) filter, is a low pass filter. It blocks the higher frequency MoCA uses and will keep your MoCA signal from either leaking out to your neighbors over the coax, and/or will block your neighbors MoCA devices from getting in
Moca Install with Netgear Modem and Mesh Network (Internet Only)
Hi All, I have a NETGEAR Modem, NETGEAR Nighthawk mesh network. Have Internet only plan. I bought a couple of MOCA 2.5 adapters and a POE filter. Trying to figure out how everything gets setup. Since I am not using Cable TV boxes, can I install the POE filter onto the Cable going into my modem? Do I
Question
I am confused by this reply - your technician mentioned nothing when installing the XD4 into my MoCa-enabled network, no information on X-2Gig mentions a sudden incompatibility with MoCa, the Gateway I am required to use with the XD4 has MoCa settin
Moca with XD4 modem (X-2gig)
We recently upgraded to X-2Gig service and received an XD4 modem (which i understand is a DOCSIS 4.0 modem), and while the service works great at first at full speed, it drops to half speed after a few hours. This speed drop does not happen with our MoCA adapters unplugged, so I suspect some interfe
Question
I'm no expert on MoCA but have it installed via stand alone adapters. My understanding is that if there is a PoE filter between the modem/gateway the MoCA data cannot get past the Cable Modem to the outside world. The adapters I have will permit me t
Enabling Privacy on MoCa Network
Hello, I just enabled MoCa on my XB7 and installed an adapter in another room for my stepson’s Xbox. Got everything working, but since I’m in an apartment, I don’t know if a PoE is installed on the outside line. Under MoCa diagnostics in the XB7, privacy is disabled. How can I enable this on my XB7?
Question
user_ukhqg0 Hello and thank you for reaching out via our Xfinity Community Forums. We understand how frustrating it can be when your internet connection isn’t working as expected. To help with, please review and try the following steps: Power Cy
MoCA not working after router reboot/reset
I have a TG4482A router installed about 1 month ago (new customer) I have 4 MoCA adaptors and all connections were working perfectly The router was reset by mistake. I Enable the MoCA feature, rebooted, unplugged and plugged back in but I am not longer to connect to the router via the devices that a
Question
Spoiler (Highlight to read)I purchased the one you recommended and it had been out of stock, so they sent me:Commscope CSMAPDU9VPI 9-port MoCA HomeConnect Passive VoIP Amplifier with MoCA ConnectivityI purchased the one you recommended and it had bee
Amplifier or splitter with amplifier, internet speed, XFI speeds
Hello everyone, my name is Karl. This is my first post, I need some help, advice, some clarity (obviously why I'm here haha). I am somewhat tech savy and I am mechanically inclined. But the coax dB and frequencies and interference and such is all new terms to me since I have never ventured into this
Question
The only spliter I have is a BAMF 2-Way Coax Cable Splitter Bi-Directional MoCA 5-2300MHz. This is located at the coax coming into the home from the Commscope 5-port MoCA HomeConnect that was installed by the Comcast Installer. The spliter is connect
Xi6 Live TV Freezing Constantly
My Setup: xFi Advanced Gateway = XB6 (ARRIS TG3482G) Main X1 TV Box = ARRIS XG1v4 Bedroom 1 = Arris Xi6 Connected Wirelessly Bedroom 2 = Arris Xi6 Connected through Ethernet Here's my issue: The Xi6 devices within my two bedrooms are horrible for Live or Recorded TV. This has been going on for a lon
Question
@XfinityAldrik That's correct. My only option is to disable MoCA entirely, which does not take when selecting 'Disabled' and then 'Save.' A pop-up appears that says an operation is in progress and it is working to save your settings, but MoCA remain
MoCA Adapter Not Sending Internet
Just bought some ScreenBeam (ECB7250) MoCA adapters to get Ethernet running to my office. We have an xFi Gateway XB8 (Technicolor CGM4981) with MoCA enabled. All splitters have been upgraded to allow up to 1675hz. POE filter installed from street line into first 3-way splitter that goes to master be
Question
@user_939e87 The type of dwelling makes no difference..It's a standard. Their MoCA implementation doesn't employ any MoCA security... Most other modern third-party MoCA 2.5 retail devices do...
EG
commented
1 year ago
to the conversation:
0
3
Enabling Privacy on MoCa Network
Hello, I just enabled MoCa on my XB7 and installed an adapter in another room for my stepson’s Xbox. Got everything working, but since I’m in an apartment, I don’t know if a PoE is installed on the outside line. Under MoCa diagnostics in the XB7, privacy is disabled. How can I enable this on my XB7?
Question