I currently have an XB8 gateway and am running into issues with the MoCA setup. The way my network is connected right now is as follows: 1st floor coax outlet -> coax splitter -> one output into XB8 -> one ethernet port to a router. 2nd floor coax outlet -> MoCA adapter -> desktop PC. Am I just miss

My apartment complex ( with built in routers XB7 ) has terrible wifi coverage my pc only two rooms away gets only 15-20Mbps out of our 1200 download. I purchased a screenbeam 2.5 and plugged it into the coax in my room and enabled MocA thru 10.0.0.1. It works now but barely. Speeds are unsatisfactor

Hi, I have Xfinity cable with: - five TV cable boxes (XiD-c, xfinity.com/x1, Model CiSCO CDX01ANI) - xFi Gateway. The gateway is MOCA-enabled. I added three Hitron Bonded MoCA 2.5 Adapters (1 Gbps Ethernet, 2.5 Gbps Over existing Coax Cable) from Amazon: https://www.amazon.com/Hitron-Ethernet-existi

I have AARIS SVG2482AC that has MoCa Indicator but is not turned on. What will it take to turn on MoCa? Device Manual suggest "Note: This is a Comcast feature along with other components that Comcast must install.".

Hello. I enable MoCa on XB7 Gateway, then I bought an ASUS 2.5G adapter. As you can see in the photo, Moca is "Status: unconnected no devices" . Does anyone have a solution for this ? Thanks

Hi All, I've recently moved to Xfinity. I noticed that MoCA is available in-built with the modem i've received. Does that mean I will need just one more MoCA adapter plugged into my co-ax upstairs to use internet over ethernet instead of wifi? I'm a li'l confused, Appreciate it if anyone can guide m

When I turn on the MoCA Bridge on my Tivo Bolt my Internet stops working on all my devices. I have tried 2 different Tivo Bolts but I get the same issue. This issue started happening on an older Xfinity Modem so I got a new Xfinity modem but the issue remains. I talked with Tivo and they said the mo

Hey guys so i have a quick question. The lines from my street are coming in hot @ +~13DBmv give or take a little bit. Im going to be activating a total of 6 devices on this amplifier including the cable modem on the -6db VOIP output. My question is how can I bring the power levels down and within sp

I have a MoCA LAN that is sharing coax with my set top boxes. I noticed that sometimes my remote STB hangs after a reboot or firmware update. I also noted that the STB's Mac address shows up on my Gateway/router connected devices list and that it has been served an IP address. I assume that the STB

Hi All, I have a NETGEAR Modem, NETGEAR Nighthawk mesh network. Have Internet only plan. I bought a couple of MOCA 2.5 adapters and a POE filter. Trying to figure out how everything gets setup. Since I am not using Cable TV boxes, can I install the POE filter onto the Cable going into my modem? Do I

I recently purchased two Motorola MM1025 MoCA adapters to use in my home. I had been wanting to get my Xbox Ones off the WiFi and onto a wired network, and after I moved to a new rental home, it seemed like the best time to try it out. You may not know this, but if you have an Xfinity Streaming TV b

I have the X6 gateway and live in an apartment. Multiple unknown devices stay connected even after i pause or forget them slowing down my connection. Speed tests show good results, but getting web browsing pages, as well as cell phone apps to load takes over 5 min sometimes. Probably due to how many

I know it’s possibly, possible. But I have no clue what I’ll need or how to do it. my home is coaxial wired. I have a new “10g” (white tower) modem from Xfinity (800mbps /unlimited GB plan) in a bedroom connected to coaxial cable. I'm unable to run an Ethernet from the modem to my PlayStation. Howev

I am on the X1 platform for TV, internet and phone and until recently had an XB3 (TG1682G) gateway. I have an ARRIS XG1v4 DVR box, an XG2 box and 3 Xi5s. I set up a MoCA network using 3 Actiontec ECB6200 MoCA adapters and 2 WCB6200 MoCA adapters (one on each floor). The adapters are running on whate

Xfinity’s coax cable comes in to a central closet in our new house. It connects to a splitter that feeds four critical rooms. At present, an Arris TG3482G Moca-capable router is in one of those rooms and that’s the only room with a wired connection along with the Arris's limited WiFi. (BTW, all I wa

Hi, i am currently setting up the screenbeam moca adapters to the xb7 and am receiving no coax signal. My guess to this problem is that 1, the moca is not enabled on the XB7 (I currently do not have access to the gateway login) or 2, a 4 way spiltter that is incompatible with the adapters that is pr

I was on Chat with an Xfinity agent who attempted to activate a new modem being added to my account. This modem was a high-speed replacement device for my older modem which worked well but had a speed limitation. Activation of the new modem was not successful. After multiple attempts we gave up. So

I want to run an ethernet connection from one of my Coaxial ports in my home office instead of running ethernet throughout the home. I’m trying to piece together how this all works. I have a Multi-room DVR filter connected outside to the Coaxial cable. Is this considered a MoCA filter?Inside the hom

Hey guys. I'm not an expert in network but I'm having troubles with my Moca setup. I successfully connected everything, and my PC has internet via ethernet, but I definitely have packet loss and weird spikes of high ping. This is the adapter I currently have: Amazon.com: Hitron Bonded MoCA 2.5 Adapt

Came back from a work trip to find that a bunch of devices had been connecting/accessing my network while I was gone via ethernet. I am also assuming my neighbor has a router plugged in via ethernet to service wireless devices on what is supposed to be his network. MoCA filter has been installed sin