Can't find what you're looking for?
Official
Accepted
Unanswered
Advanced Filters
Search Results (1.2K)
Generally speaking, no. You can't have multiple modems, modem/WiFi router combo units, or Comcast gateways at one residential address without jumping through hoops if it's even possible. It would also be expensive as you'd end up with two acco
Second modem/router
I have a modem/router broadcasting Internet from my office on the first floor of my house, but the signal does not reach the basement below it. However, I have a cable outlet in the basement. If I order a second modem, can I connect it to that cable outlet and have it broadcast in the basement? Than
Question
Closed
New Outlet, MoCA, 2nd router? I'm so confused.
Hi, I really wish there were someone to talk to in person about this. I've called and been to the store and only get conflicting information and little help. My cable was brought into my attic where my office resides, it connects to my modem/router and my desktop is directly plugged in. This provide
Question
•
Your Home Network
I checked and I have a MoCa filter installed on the main.
Someone else’s recordings showing on my account!
This is the second time this has happened in the last two months. Out of nowhere, my DVR (both on the physical box and Stream App) is showing somebody else's recordings. My box is now flooded with shows that recorded days ago, which were not there this morning. Clearly something is mixed-up as these
Question
MoCa doesn't work when Comcast takes their MoCa network controller off line, because MoCa only work on mesh topology. They took off their network controller on my network segment too, couple of month ago. I don't see their network controller in mes
Xfinity gateway MoCA behavior in bridge mode
Hi, I recently got a new Xfinity One modem and it supports MoCA. I run my own router in the 192.168.x.x address domain and do not want to change the configuration of my network so I plan to reconfigure the Modem to operate in "Bridged" mode. My understanding is that in this mode, it would take any D
Question
The boxes use moca from the main box to communicate. It’s going to boil down to 3 things because it’s affecting all of the satellite boxes. Assuming all connections are the same and boxes haven’t been moved around, Things to try1. The gateway is in
Rdk 03036
I keep getting this code on all of my boxes except the main I’ve resetted 4 times ran an system refresh an hard started each one talked to customer service they did the same thing an rebooted it to no avail ..all connections r tight any one can help I’d appreciate it stuck in with the quarantine an
Question
Yes. We've seen many posts here that the MoCA feature gets turned back on with their overnight reboots / updates for the device. You really need to install a MoCA P.O.E. (Pont Of Entry) filter on the input port of the first splitter off of the street
Other people who shouldn’t be accessing my Wi-Fi through Moca
Moca was on and random devices were added to our wifi We called and you added advanced security 2 days later we are seeing people connecting who shouldn’t be Xfinity turned off the moca but then they started back up MoCa is the connection type we would like to have someone come to our apartment to f
Question
Accepted Solution
You need to install a POE MoCA filter on the input port of the first splitter off of the street drop to keep the MoCA signal in your premises and to keep the neighbor's signals out. Amazon has them: https://www.amazon.com/SNLP-1GCW-Filter-Eliminate-M
Unknown devices connecting to my gateway
I have noticed recently that whenever I am online I get a notification that someone else’s devices (iPad, iPhone, MacBook) has also been connecting to my wireless gateway through MOCA. I am able to kick them off/forget device and disable MOCA, but it somehow enables itself again. I have changed my W
Question
No issues, Can you explain what MoCA is for though?
xb8 and MoCA with netgear xr1000
right now I have my Xb8 gateway activated normally and connected my Netgear router as a wireless AP... do I have the best setup with these 2 devices or should I change something up?
Question
That's just an advertising plug. All MoCA splitters are universal.
XiD X1 and ethernet switch
Long time fios user, just switched to xfinity so am trying to figure things out. Xfinity Coax enters house in Den, connects to xFi gateway, which I believe is considered to be a modem/wifi router. This replaces my Fios Model G3100 router except the G3100 needed both an incoming coax and an additiona
Question
@XfinityTony Thank you for your reply. Yes, I'm definitely aware that running both devices (Xfinity gateway and personal device) both in router mode is not ideal - but I'd also prefer NOT to use a streaming device such as a Roku on my outdoor TV.&nb
Setup VPN Without Modem In Bridge Mode
Hello all... I previously had a VPN working, but some changes in my setup has introduced some complexity. I have an Asus Rapture GT-AX11000 router with an Xfinity xFi modem. I am using OpenVPN on my Asus router. Previously, I had my Xfinity modem in bridge mode, and all was good. My router had my WA
Question
Small. 2.3 inches long. Looks like a long coax cable connector: https://www.amazon.com/Filter-MoCA-Cable-coaxial-networks/dp/B00KO5KHSQ/ref=asc_df_B00KO5KHSQ?tag=bngsmtphsnus-20&linkCode=df0&hvadid=80195746823036&hvnetw=s&
What does an Xfinity Moca Filter look like?
So I have a Moca adapter coming next week. I know my modem is Moca ready, but someone said something about a filter. I have zero clue what that even looks like. Is it located on the first splitter for the main line coming in the home, or is it on the main line outside?
Question
I think they are now referring to their gateway and the moca light
My cable box is beeping at me
Little bit of an odd situation here, my cable box will not boot up and it’s continuously cycling and resetting before it gets off of the welcome screen. Checked all the connections they’re good contacted support and they said a technician might need to come out but I’ve done some research and that s
Question
Accepted Solution
SOLVED : After a ton of troubleshooting and research not documented here, I found an article indicating that Xfinity DVR's ( which I happen to have ) use MoCA for on-demand content and operate at the lower end of the D Band around ~1100 to ~1200 ( I
SOLVED : Are MoCA adapters allowed by Xfinity....
Finding mixed answers to my questions, so I am looking to clarify. Are MoCA adapters allowed to be used by my client PC's to access the Internet while using an Xfinity modem/router. I purchased a MoCa adapter for one of my PC's and I get a link lights for MoCA and Ethernet, but no activity. No data
Question
Good morning @Z3ro, and thank you for reaching out to our dedicated Communities team with your MOCA concerns, we appreciate your time and hope you are having a great start to your weekend so far! To confirm, was this amp installed by XFINITY? After d
Is EVO1-9-U/U MOCA compatible?
I want to start using MOCA. Do this amp support MOCA or do I need a new one?
Question
You can try to log into the management interface @ http://10.0.0.1 username=admin password=password unless you changed it. You may be able to disable MoCA there, although people report it does turn itself back on sometimes. It may solve
Unauthorized users: moca
I recently upgraded to the new Xfinity gateway. I have a secure password, but unauthorized users and devices are joining my network via moca. How do I turn this feature off
Question
@user_4sgdpb Is there is a coax outlet up there ? If so, and if your employer will allow it, another option would be to use a MoCA solution. It's ethernet / hardwire over coax cable. You can Google MoCA for more info.
Need to hardwire 2 desktops on different floors to Gateway
My husband and I are both going to be working from home. Each of our jobs require us to be hardwired to our modem/router. His office is on the first floor, mine is on the second floor on the opposite side of the house. How can we both hardwire? What do I need to do? And please, talk to me like I kno
Question
I see that the new XiD is not on your moca network which is needed so it can talk to the main DVR box. Can you try enabling MoCa on your internet gateway? You might need support (www.xfinity.com/xfinityassistant) to help with that if you are unabl
X1 Box exchanged in Living Room now the X1 Box in Bedroom won't connect
The X1 box in the living room was exchanged after failing to work (it was old) and the new one installed yesterday is working fine. However, now the X1 box in the bedroom that was working just fine before yesterday won't connect to Xfinity. Have done multiple resets, restarts. unplugged and restarte
Question
@user_f4a671 If you're using a newer xfinity gateway device and don't have a MOCA filter on your line, I'd recommend you get one. This is the one I use, and it's working quite well: Filter, MoCA POE for Cable TV & OTA coaxial Networks ONLY HT
Ctdi cmtx listed 4 x
I just set up my new Xfinity router and right off the bat it looks like there are four other routers attached to my network that are called CTDI CMTX
Question
Closed
coax entry to home
Hi! I just bought an older condo, and I'm trying to install a MoCA system I'm told that for that I should install a MoCA filter at the point where the cable enters my house from the street. How do I find where that is? Right now, all I know are the places where the coax comes out of the walls.
Question
•
Your Home Network
the x1 system for xi6 is not designed/set up for using a customer owned gateway(modem). The xi6 works using MoCA over ethernet to communicate and use the DVR's tuners. You can use a Roku or Firestick device to use the stream app with no monthly extra
Rustyben
commented
4 years ago
to the conversation:
0
5
4k wireless box Xi6 and customer owned modem.
I currently have the Xfinity XG1V4-A DVR box, a Net Gear CM2000 modem and (1) Xi6A wireless 4K box. Went to local Xfinity store to pick up (2) more Xi6 boxes. They would not give them to me because I did not have Xfinity X1 Modem. I informed them I already have a Xi6 box which I got 6 weeks earlier
Question