Contributor
•
235 Messages
X1 Technical Issues
Welcome to the new "X1 Technical Issues" thread. We ask that you post all of your X1 related technical issues (Audio, Set Top Box, etc.) here.
Below, you will find links to X1 Help articles that may assist you in resolving your technical issue:
Xfinity TV: Basic Troubleshooting
Find and Troubleshoot Error Codes
Thank you in advance for posting!
Jdawg1
Regular Contributor
•
125 Messages
9 years ago
0
0
The_Bishop
Frequent Visitor
•
11 Messages
9 years ago
I'm having an issue with my X1 box. It's an Arris XG1-A.
When I shut my TV down and later turn it on, it will usually default to 720P. I can manually go to the settings menu and switch back to 1080P, but this is a hassle. Is there a way to lock the box in 1080P?
The TV is a brand new Vizio P503UI 4K UltraHD. I have tried several HDMI cables with the same results.
0
0
myprontopup
Regular Visitor
•
5 Messages
9 years ago
I'm having a new problem with the my X1 DVR when connected to a Sony HD projection TV. It had been working normally for about a year, and within the last 2 weeks it has been having a problem with the display. First, when I turn on the TV in the afternoon, the display is "enlarged" such that when I click on the 'XFinity' button (to bring up the onscreen menu), it appears by the menu is off the screen so I can't see it. If I turn off my X1 box, and then turn it back on it is "fixed". I suspect this is something that is getting messed up when it does a nightly update (I had a similar problem when I first got my X1 box, and that was eventually resolved). Anyway, this is a new problem and it's rather annoying to have to reset the box each day to watch TV.
Is this a known problem?
0
0
The_Bishop
Frequent Visitor
•
11 Messages
9 years ago
Well, the 1080i doesn't stick. Hopefully they fix this soon. It would be great to have an option to 'lock' the resolution.
0
0
bigdg
Frequent Visitor
•
13 Messages
9 years ago
I just upgraded to X1. I am having the same issues that you were having - frequent hangups, sometimes the sound goes out and "connecting to server" issues. It is hard to believe that the problem is signal issues whem the previous xfinity system has worked fine for years and nothing changed except the modem and boxes.
X1 does seem like it is very buggy beta software. If this is as good as X1 gets, I want to go back to the old system.
0
scjohnson312
Problem Solver
•
591 Messages
9 years ago
It could very well be signal issues, the X1 boxes have much tighter signal requirements as they have a cable modem (Internet) in them, and if the signal levels are not pristine you will have frequent lockups/slow remote/unable to connect issues. The old boxes didn't have this requirement. In many cases the TV outlets in your home will have much weaker signal than the outlet the Internet modem is on due to splits, cable length, etc.
0
0
bigdg
Frequent Visitor
•
13 Messages
9 years ago
I had a cable modem before, triple play, the works. It all worked fine. Now I have X1 and many problems
0
0
scjohnson312
Problem Solver
•
591 Messages
9 years ago
Yes but that is meaningless unless the modem was using the same physical outlet as X1 is now.
0
0
JoeywitQ
New Poster
•
2 Messages
9 years ago
I appreciate the response to Lobsta. I have the same issues with my DVR, and the technician who installed it appeared very knowledgable and efficient, checking the signal at every outlet prior to the installation. There is an amplifier on the line, and yes, it is plugged securely into the outlet.
The first problem was returning to Live TV after watching a recording. Called customer service and they were unable to connect to the device although it appeared that the problem was resolved while she was on the phone. I will be calling again soon as the extended delays switching between channels (if the channel EVER tunes in) is very annoying, as well as the delayed response to fast forward and play commands from the remote while watching a recording. I have been a TiVo user for over a decade so I know my DVR expectations are a little high, but trying to watch anything on this DVR gets on our nerves. We can stream the recordings to the other device without ANY problems, but unfortunately, that device is not in a room we can always watch TV.
We are missing our TiVo right now...
0
0
manamok
Gold Problem Solver
•
2.7K Messages
9 years ago
Try pairing your remote to the X1 - the instructions are on the back of the remote. Good luck.
0
0
Teckx
Frequent Visitor
•
18 Messages
9 years ago
0
0
Teckx
Frequent Visitor
•
18 Messages
9 years ago
0
0
JoeywitQ
New Poster
•
2 Messages
9 years ago
Thank you. This has been a slight improvement. The device is a little more responsive, except when attempting to tune in regular (HD) channels after watching a recording. It still takes several MINUTES at times.
0
0
scjohnson312
Problem Solver
•
591 Messages
9 years ago
0
0
Teckx
Frequent Visitor
•
18 Messages
9 years ago
I attempted to switch out the splitter with another one i had and the same issue occured. internet and tv do not work with the splitter anymore. i have to go directly from the wall to the x1 dvr. Even when i went back to wall to dvr it didnt work 90% of the time
0
0