Visitor
•
2 Messages
XR15 pairing TV and Receiver
Hello I have an LG OLED G2 TV (code 12731) and a Bose Soundbar 700 (code 31933). I have tried over and over to pair both simultaneously and cannot seem to figure it out. I can get one or the other to work using either code, but one always deletes the other. My hope is to have the volume buttons on the xR15 remote controlling volume on both simultaneously. I have tried using the walkthrough for pairing the remote to both devices (A then remote setup) and have reset it and tried manual setup of Bose receiver first and Tv second. No luck at all! Please someone tell me there is a way!!! Yes my TV sound output is set to both TV and output device.
XfinityAntoine
Official Employee
•
1.4K Messages
2 years ago
Hey there @Seamandrew! The soundbar should connected to the television. Follow the directions found in the tv manual. Then when the tv is turned on, the soundbar will turn on too. The tv menu controls what speakers, headphones, etc. are being used for television.
2
dubrowns
Visitor
•
2 Messages
2 years ago
So the xr15 is not able to work with both a tv and receiver?
0
0
tstack
Contributor
•
644 Messages
2 years ago
I have a Sony tv and Bose 900 SB and I also have pairing issues with XR15 remote. Basically when powering off using Comcast remote the TV comes back on. Tried all CEC Options with Bose 900 using the Bose App. Only way to get it to work to only pair the remote with Sony tv and skip when the x1 menu asks me to pair with Audio system. So when I power off with xr15 yes it works but when I use the volume up and down buttons on XR15 I see the TV volume Levels on the TV screen which is a little annoying.
(edited)
0
0
dubrowns
Visitor
•
2 Messages
2 years ago
I have a similar problem in that the xr15 will turn on both my Sony receiver and LG tv but when I go to turn them both off it will only turn off the receiver. I can control my volume through my receiver though.
1
0