Jayce54321's profile

Visitor

 • 

2 Messages

Sunday, October 15th, 2023 1:23 AM

Closed

Smithsonian Channel unwatchable

The picture is continually pixelating to the point you cannot watch the channel. Smithsonian Channel is the only channel with this problem. I would think Comcast would verify signal strength/quality before resending it. 

Official Employee

 • 

1.4K Messages

1 year ago

Thanks for being an Xfinity customer and reaching out, Jayce54321! I'm sorry you've been having issues with the Smithsonian Channel. Do you notice the issue with any other network or on any other device?

 

Visitor

 • 

2 Messages

@XfinityAntoine​ We have occasional issues with other channels, but SC is the worse and it is consistently bad.

Official Employee

 • 

1.7K Messages

Thank you so much for the update @Jayce54321 and we hope you are having a great week. Have you tried resetting the box to see if that helps or to check that no cables are loose? 

I am an Official Xfinity Employee.
Official Employees are from multiple teams within Xfinity: CARE, Product, Leadership.
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Please, mark a reply as the Accepted Answer.tick

Gold Problem Solver

 • 

26K Messages

1 year ago

The picture is continually pixelating to the point you cannot watch the channel. ...

Pixelation happens when the signal for the channel you are trying to watch is too weak or has too much noise. This might be because of a bad cable box or a problem at Comcast (check https://www.xfinity.com/support/status/, 1-800-Comcast voice response, or the "Xfinity" app) but is most likely due to a poor connection between the box and Comcast's network, usually in or near your home.

Troubleshoot by checking all connectors for corrosion and tightness, and by looking for damaged coax cable. Running the cable through a surge protector, a defective splitter, or too many splitters can cause signal problems as well. If there is an amplifier in the line make sure it's getting power. You might also try unplugging the cable box/DVR/digital adapter power cord for a minute or so.

If you can't find the problem or you'd rather have Comcast take care of it and an employee doesn't provide any help here, call them at the phone number on your bill or 1-800-Comcast, or use one of the options on https://www.xfinity.com/support/contact-us/. Ask them to check the account setup and send a refresh signal to the box. If they can't fix the problem remotely, insist they send a tech out to identify the cause and correct it.

If the tech finds bad coax, splitters, amplifiers, or connections in your home (even if Comcast originally supplied them) you'll probably have to pay for the visit (approx. $100) unless you have their Service Protection Plan (https://www.xfinity.com/support/articles/service-protection-plan, closed to customers that don't already have it). If the trouble is due to a faulty Comcast cable box/DVR/digital adapter or anything outside your home, you shouldn't be charged.

Please be aware that there are 2 kinds of responses in this Forum: Replies and Comments. When you Comment on a post by scrolling down to "Comment on this post here...", I am notified of your response. But if you select Reply, I am NOT notified and may not be aware of your response.

(edited)

forum icon

New to the Community?

Start Here