Solved! Go to Solution.
no help yet
@Caitlin0712 wrote:
The soundbar I have worked with the tip above when I hit 992 and channel up until it turned off, but my xfinity remote still doesn’t control the volume. Any further tips?
Did you try this?
https://www.xfinity.com/support/remotes
I just went through this with my Dad. Sceptre uses Sony codes. For my Dad's TV and sound bar, we found 3 -4 different Sony codes for each unit, tried them all until it worked.
Hope this helps.
Cgaro62
Many codes enable remote to control vol up/down but none of the codes shuts the soundbar on/off. The tech who visited said it can take a while for new codes to be found and released. That stinks. Also, although my TV is only one year old and has ARC, I was not able to hook it up using ARC. Trying resulted in no sound at all and, yes, I changed all of the TV settings to enable ARC. The ARC set up is not simply plug in an HDMI. It was tedious trial and error and in the end I could not use it. Now using just the optical. Sound is fine but I understand ARC might have been better.
@kaywu wrote:
I have a Yamaha soundbar as well but the process didn’t work for me. Maybe I’m doing something wrong?
I hit setup until it blinks green. Hit 992. Hit channel up until it turned off. Hit setup until it blinked green. Hit all on. Doesn’t turn back on?
I guess it’s possible that it’s not compatible but I figure if one Yamaha soundbar works, shouldn’t they all?
do same procedure but 'skip' the one that 'worked(but didn't really).
@kaywu wrote:
I have a Yamaha soundbar as well but the process didn’t work for me. Maybe I’m doing something wrong?
I hit setup until it blinks green. Hit 992. Hit channel up until it turned off. Hit setup until it blinked green. Hit all on. Doesn’t turn back on?
I guess it’s possible that it’s not compatible but I figure if one Yamaha soundbar works, shouldn’t they all?
You can also try this:
https://www.xfinity.com/support/remotes
@Will_ohara wrote:
Sound bar
Try this:
https://www.xfinity.com/support/remotes
Hello . I have a Yamaha yas -108 soundbar, how doni pair it it to my x1 xr15
https://www.xfinity.com/support/remotes
My remote voice quit working so I had to get a new remote and I can't get it to pair with my Polk soundbar with the 992 method. I know it works because when the tech set it up for me 4 months ago he had it paired. None of the codes suggested for Polk Audio worked either.
I worked forever trying to get my XR11 to control the volume on our Bose soundbar. Finally used the recommended "992 and channel up". It worked! Thank you so much for posting this tip. I appreciate it!