Problems with internet traffic

Ping is helpful in identifying problems, but doesn't do much to help us understand what's causing them. Also it's best to ping a web server rather than a DNS server.

Are you connecting via Wifi or Ethernet? If Wifi, it's best to switch to an Ethernet cable connection if possible for testing. That would allow you to determine whether the problem is the Wifi signal or the link between your modem or gateway and Comcast's network. Network connection problems that affect both Ethernet and Wifi devices are often due to poor coax connections or damaged coax cable, usually in or near your home. Running the cable through a surge protector, a defective splitter, or too many splitters can cause signal problems as well. If there is an amplifier in the line make sure it's getting power. 

If you want to troubleshoot this yourself, please see Internet Troubleshooting Tips. If you still need help, please post your Internet plan speed and the following information from your modem or gateway (from http://192.168.100.1 or http://10.0.0.1):

• model number
• uptime
• downstream: power levels, SNR (or MER), and error counts for all channels
• upstream: power levels for all channels
• complete event log, if available (Be sure to remove or blot out any MAC addresses. Forum security processing considers them "personal information" and may prevent the event log from posting if these are present.)

Copy and pasted text is preferred over images. Be aware that, if you post any images, your message will be made Private for a time, as all images must be approved by the Forum Moderators before the messages containing them become generally visible.

If you can't find the problem or you'd rather have Comcast take care of it and an employee does not respond to your message here, call them at the phone number on your bill or 1-800-Comcast, or use one of the options on https://www.xfinity.com/support/contact-us/. It's not likely they can fix the problem remotely. If not, insist they send a tech out to identify the cause and correct it.

If the tech finds bad coax, splitters, amplifiers, or connections in your home (even if Comcast originally supplied them) you'll probably have to pay for the visit (approx $100) unless you have their Service Protection Plan ( https://www.xfinity.com/support/articles/service-protection-plan, closed to customers that don't already have it). If the trouble is due to a faulty Comcast rental device or anything outside your home you shouldn't be charged.

Please be aware that there are 2 kinds of responses in this Forum: Replies and Comments. When you Comment on a post by scrolling down to "Comment on this post here...", I am notified of your response. But if you select Reply, I am NOT notified and may not be aware of your response.