New Poster
•
2 Messages
No internet: synology rt2600 not getting ip and surfboard sb8200
My synology router doesn't get an IP from the surfboard. On the connection field it appears as disconnected and it doesn't show an IP. I do get internet if I connect directly to the modem. Synology is connected to the modem through the wan port. What can I do to help set it up? I've been hours on this, so any help is very much appreciated!
There is a field in the primary Interface configuration that asks for ISP Settings which I don't know what to put, the parameters that it asks for are:
Hostname (option 12):
DHCP Client ID (option 61):
DHCP class id (option 60):
DHCP client option:
@sbernie2 I know you had a similar issue. Could you provide some help in this case?
Responses
EG
Expert
•
86.5K Messages
9 m ago
You need to power cycle/reset the modem each and every time that you change the device that is being directly connected to it.
0
0
darwin321
New Poster
•
2 Messages
8 m ago
Thank you, @EG I have tried that but when setup at a wireless router (it also has the access point option) I still don't get an automatic setup from the modem to the router. The router doesn't have an IP. Would configuring it with a static IP be a good idea?
0
0
EG
Expert
•
86.5K Messages
8 m ago
Do you have it in router mode (automatic configuration / DHCP) or is it in access point mode ?
0
0