Visitor

 • 

4 Messages

11/10/2026 7:05 PM

ARRIS G54 – Recurring 30/60-minute disconnects, possible firmware issue and incorrect equipment registration

I recently upgraded from an ARRIS SBG8300 to an ARRIS G54. Since installing the G54, I've experienced repeated connection resets that seem to occur in intervals of around 30min or 60min while directly connected via ethernet. 

During these incidents, continuous ping tests to my local gateway (192.168.0.1) and Cloudflare (1.1.1.1) show normal latency and no visible packet loss.

 

My G54 firmware is AC01.02.012_022625_G5X.04.20.122.

I've already tested multiple Ethernet ports and speeds, updated the network adapter driver, rebooted the G54, and tested different firewall security levels with no luck, connection continues to flicker.

Two potentially related observations:

1. IPv6 is enabled on the gateway, but no WAN IPv6 address or delegated prefix is assigned, and IPv6 does not work on wired or wireless devices.

2. My Xfinity equipment page still displays my previous ARRIS SBG8300 and a Thomson DHG546 that I do not own, rather than my active ARRIS G54.

Could someone please help investigate whether there may be an issue with the modem's provisioning, connection stability, or firmware? I'd also appreciate clarification regarding the incorrect equipment listed on my account.


Thank you!

Oldest First
Selected Oldest First

Official Employee

 • 

3.2K Messages

10 days ago

 

Gnawful, thank you for reaching out to us through Xfinity Forums. I would be happy to run through some troubleshooting steps with you. 

Please send us a DM with your name and address.

Here are the detailed steps to direct message us:

1. Click "Sign In" if necessary.

2. Click the “Direct Messaging” icon.

3. Click the “Start new conversation” (pencil and paper) icon.

4. In the “To:" line, type “Xfinity Support”.

5. As you type, a drop-down list will appear. Select “Xfinity Support” from that list.

6. An “Xfinity Support” graphic will replace the “To:" line.

7. Type your message in the text area near the bottom of the window.

8. Press “Enter” to send it.

https://forums.xfinity.com/conversations/guidelines/how-to-direct-messaging-within-the-forum/697ba1e570934d009185c514

 

10 Messages

Same issue for me 30 minute to hour intervals.

10 Messages

Was there ever a solution to this?

Visitor

 • 

4 Messages

@user_ltcouz​

No resolution yet, they're sending someone to my place tomorrow to see if anything can be done. Issue is still ongoing.

Visitor

 • 

12 Messages

Please reply here and let us know what they say? Having the same issue.

Thank you!

Visitor

 • 

4 Messages

@JameAde​ Technician did not observe any issue from Xfinity side, I'll be attempting to call Arris tomorrow about it

Visitor

 • 

4 Messages

6 days ago

Unfortunately, throwing the towel in on this one. 

Final update from me as I am just going to return the G54 and revert my plan and device to old levels. 

After calling Arris as well, they took down a lot of information regarding this event but focused on the Downstream QAM levels in particular. Apparently, I'm averaging 11 to 13 when the device is rated for -10 to 10 dBmV. I am not convinced this is the underlying issue. 

I performed a factory reset and curiously the modem's logs started displaying correctly. 

For every disconnect I observed I wrote down the firewall was reporting a log of "firewall: Reloading firewall due to ifupdate of wan (eth4)" within the same minute.

Regardless, Xfinity would need to send another technician, and I simply don't have the time as we approach the holidays. I hope everyone else has better luck, I still suspect the firmware needs to be updated but I'm simply out of time to pursue this further. 

Official Employee

 • 

4.6K Messages

I completely understand reaching the point where you need to step away from troubleshooting, especially after everything you’ve already tried. We really appreciate you sharing such a detailed update, and hopefully reverting to your previous setup gets things back to a more reliable experience. If you would like to continue with troubleshooting or scheduling a tech appointment, we are happy to help get it set up for you. While we have you here, is there anything else we can assist you with?

I am an Official Xfinity Employee.
Official Employees are from multiple teams within Xfinity: CARE, Product, Leadership.
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Please mark as Best Answer.tick

10 Messages

5 days ago

Did some research with AI tools and it seems to be due to routers connection table resetting every-time com cast signals lease renewal (30 minute to hour interval). This causes a race condition where if my machine sends a packet, the connection is added to the table in time. But if the external server packet is received first, there is no entry in the table so disconnected.  As a workaround I used a VPN which reduces all connections coming to my machine to one sent as UDP packets which avoids this race condition.

10 Messages

Seems to be more of Arris bug then Xfinity

10 Messages

Can I get help

  Same problem here, same firmware (AC01.02.012_022625_G5X.04.20.122), customer-owned
   G54 on Xfinity, wired PC. I think I found the trigger.

   The gateway's WAN DHCP lease time alternates between 3600 and 7200 seconds on
   renewal. The IP address stays the same. Every time the lease time changes, the
   G54 reloads its firewall and clears its connection table, which kills open
   connections.

   What I measured on Nov 14, 2026 by polling the gateway's status every 4 seconds:

   - 22:48:56  WAN lease time 7200 -> 3600, firewall state file rewritten,
               tracked connections dropped from 347 to 9
   - 23:18:58  WAN lease time 3600 -> 7200, firewall state file rewritten,
               game disconnected the same second
   - 22:18:55  lease time unchanged, no reload, no drop

   That explains the pattern: renewals happen at half the lease (30 or 60 minutes),
   and a reload only happens when the lease time differs from the previous one, so
   the gaps are always multiples of 30 minutes and some slots are skipped.

   The G54 runs OpenWrt underneath, and this behaviour is documented there, including
   by a Comcast customer seeing the same 3600/7200 alternation:

 https://forum.openwrt.org/t/firewall-reloading-every-time-when-different-lease-time-is-obtained-after-udhcpc-sending-r
 enew/118606

   Other details that match this thread:
   - Zero packet loss to the gateway and to 8.8.8.8 during the drops.
   - A second, unrelated app (Syncthing) lost its connection at the same instants.
   - Factory reset only moved the timer to a new offset.
   - It comes and goes in episodes. My logs show it in June, October, and November 2026.
   - IPv6 is enabled on the gateway but it never gets an IPv6 address.


   1. Please escalate to network/provisioning: why does the DHCP server alternate
      the lease time between 3600 and 7200 for the same address, and can it be made
      consistent?
   2. Is there a newer G54 firmware that can be pushed? The firmware should not
      reload the firewall when only the lease time changes.

   Workaround for anyone else hitting this: running the affected PC through a
   WireGuard VPN has kept my game connected so far. It only helps that one device.

(edited)

Official Employee

 • 

1.2K Messages

Hi there, and thanks for reaching out! I appreciate all the troubleshooting you've tried so far, and we'd be more than happy to take a look on our end to see if we can help out further! Please send us a direct message with your full name, name on the account (if different), and service address, and we'll get started!

How to Send Us a Direct Message:

  1. Click "Sign In" if necessary.
  2. Click the "Direct Messaging" icon.
  3. Click the "Start new conversation" (pencil and paper) icon.
  4. In the "To:" line, type "Xfinity Support".
  5. As you type, a drop-down list will appear. Select "Xfinity Support" from that list.
  6. A "Xfinity Support" graphic will replace the "To:" line.
  7. Type your message in the text area near the bottom of the window.
  8. Press Enter to send it.

How to: Direct messaging within the forum

I am an Official Xfinity Employee.
Official Employees are from multiple teams within Xfinity: CARE, Product, Leadership.
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Please mark as Best Answer.tick

Visitor

 • 

1 Message

10 hours ago

I have been dealing with this exact same thing for years now. It has to do with the DHCP lease time. For some reason Xfinity is only doing 1hr leases vs 24hrs. Why I could not tell you. But either at the 30min mark or it expires it refreshes the lease and cause the firewalls on out G54's to reload and it can also clear the active connections table in the process. I've been told by xfinity about a year ago that AI is used to monitor the lease times and they can't change anything. Super frustrating when getting kicked while playing an online video game. A lease of 24hrs would make it far less frustrating.

The only work around I've been successful with is running a VPN so whoever I'm connecting to does doesn't see that moment drop out and I stay connected. Fortunately it only add maybe +5-10ping on most of the games I play.

If there is ever an update on there firmware it it gets pushed up by xfinity over the coax. If you see or hear anything new or have a permanent fix let me know! I would love to fix this on my end as well!

forum icon

New to the Community?

Start Here