Contributor
•
235 Messages
X1 Technical Issues
Welcome to the new "X1 Technical Issues" thread. We ask that you post all of your X1 related technical issues (Audio, Set Top Box, etc.) here.
Below, you will find links to X1 Help articles that may assist you in resolving your technical issue:
Xfinity TV: Basic Troubleshooting
Find and Troubleshoot Error Codes
Thank you in advance for posting!
Dave453
New Poster
•
1 Message
10 years ago
0
0
CCGwen
Contributor
•
235 Messages
10 years ago
Hi tctc,
Navigate to Settings>Preferences>General. There you can toggle both "Recently Viewed Content" and "Recommendations Based on History" On and Off. Turn them off, if you do not wish to have them.
Gwen
0
0
tctc
Contributor
•
540 Messages
10 years ago
Thanks Gwen.
0
tctc
Contributor
•
540 Messages
10 years ago
HI Gwen, hate to say it, but this doesn't solve my problem, which is a serious UI issue. Hopefully you have another suggestion?
Turning off the Recommendations works fine, and turning off Recently Viewed also gets the content out of the On Demand / Recent TV Shows, which would be an acceptable solution, except that it also turns off the Last Watched functionality. Which doesn't need to be turned off, because it can be managed via the D button. Since there in no longer a Back/Swap button, the only way to go back and forth between channels is with Last, which is now turned off... aaannd I'm back to 1970s functionality with yet another feature...
0
Robin_Gar
Frequent Visitor
•
9 Messages
10 years ago
0
0
geek46
Expert
•
18K Messages
10 years ago
To be sure.... move the mini-box to the working cable outlet the main box is on.... this will prove your point without a doubt....
-=Ray=-
0
0
Crimsonutes
New Poster
•
4 Messages
10 years ago
I have the same problem and I've seen at least one other thread with the same issue. I too spent 30 mins on the phone with tech support the day after my new system was installed. The main box works fine, but the mini box has no signal. I went through the same common support options (check cables, reset box, etc). They told me to take it to the comcast place to get a new one, which I haven't done.
Maybe I'm crazy, but I don't think this is an equipment issue. When the tech installed, he said the mini's were having trouble accessing the activation servers and to just keep trying. Well, I managed to get it activated (because it asked me to assign a description to the box), but it has never worked. It either stays at a black screen after the initial boot screens, or gives me the red screen with error code RDK 03031. Another user reported the same issue and a tech installed a signal amplifier.
My point is, it sounds like this is a back-end problem but I'd love to hear if anyone has their issue resolved.
0
0
CCAndrew
Gold Problem Solver
•
25.9K Messages
10 years ago
0
0
geek46
Expert
•
18K Messages
10 years ago
Perhaps he is having MOCA issues? Too bad OP didn't state how many outlets he had active...it would have been an interesting test....
-=Ray=-
0
0
CCAndrew
Gold Problem Solver
•
25.9K Messages
10 years ago
0
0
CCAndrew
Gold Problem Solver
•
25.9K Messages
10 years ago
To be sure.... move the mini-box to the working cable outlet the main box is on.... this will prove your point without a doubt....
-=Ray=-
_______
That won't work, the Xi3 depends on the dvr being powered on and functioning.
0
0
Geess2
Frequent Visitor
•
11 Messages
10 years ago
I enjoy using the X1 App on my Google Nexus 7 tablet to watch DVR recordings outside, but the recordings list is difficult to navigate because it shows numerous old recordings that were long since deleted from the DVR (and are unable to be played from the tablet).
The App shows the DVR 84% full, when in reality I'm currently at less than 35% full. I wish there was a way to force the app to "re-scan" the DVR for an accurate list of recordings.
0
0
X1getsanF
New Poster
•
4 Messages
10 years ago
0
0
RossBiddle
Contributor
•
19 Messages
10 years ago
Disagree that it means nothing as without a strong signal, you dont get speeds like that and its a general indicator of signal strength/quality.
Regardless, my cable comes into the house and splits two ways to the modem and to the X1 box - there is no powered amplifier.
Not sure why X1 is a complicated setup as I have exactly one box and connected directly to the new feed from the street, HBO and a few other HD channels freeze...
I can't see taking time off to meet a tech before trying a factory reset as when I first installed the box there were all sorts of provisioning issues that were eventually ironed out through a dozen phone calls (no changes on my side to equipment or cabling btw).
thanks for the response.
0
0
RossBiddle
Contributor
•
19 Messages
10 years ago
I would like to factory reset my X1 box . The initial install months ago did not go smoothly, and although its working for the most part, HBO HD, MAX HD, and some other premium HD channels all either don't load or play for a few seconds and then freeze. All other HD channels work just fine.
I have connected directly to the cable feed coming into the house without a splitter and the box does the same thing, and the line to the house is new for this install so I don't think its a signal issue.
My internet connection gets 122Mbps down consistently so again, signal doesnt seem to be an issue.
Can anyone walk me through a factory reset? I wont be home at a time when a tech comes out for months so I'd like to try this first and phone support has done their remote reset stuff without any luck (they said it "kicked them out of the reset" and had me power cycle it manually which also doesn't sound right.
thanks!
0
0