Contributor
•
235 Messages
X1 Technical Issues
Welcome to the new "X1 Technical Issues" thread. We ask that you post all of your X1 related technical issues (Audio, Set Top Box, etc.) here.
Below, you will find links to X1 Help articles that may assist you in resolving your technical issue:
Xfinity TV: Basic Troubleshooting
Find and Troubleshoot Error Codes
Thank you in advance for posting!
SteviePD
New Poster
•
1 Message
9 years ago
Hi all, and especially Comcast.
I'm writting this in hopes that it leads to root cause that so many have been posting.
To start, We have 4 TV's in our house. 1 DVR (or main box) and 3 sattelites boxs. I also have internet (of course) and voice services .. What is or was called triple play.
Our system was installed on the 17th of Oct 14 and in general ran into the most common issues that everyone has since.
Listed by device (I believe the issues differ depending on box)
1.) DVR box.. I have to say we experience the least amount of issues with the DVR box as compared to the smaller satellite boxes.
- Audio clipping , occasionally the audio will stop for a few seconds then return. this happens at least one a day
- HDMI port reset , Perhaps every other day the HDMI port will reset out of the blue. Screen will go black but the DVR is still playing. The picture does come back in a few seconds. I have never had this problem with the older DVR. (this may have sometime to do with the message popups.
- Erratic remote response, This is much more of a problem on the sattelite boxes but at times it happens on the mian box.
- Hard reset required at least twice since installed. I believe this is due to software updates occuring overnight but I can't be sure. The other day I can hear channel but there was no video. Only after pulling the plug and restarting the box the video returned.
2.) Satellite boxes (or slaves, not sure what Comcast calls them). I have 3 of these boxes and all have the same issue.
- Erratic remote response. This is the biggest issue and most common problem I run into. Simply the remote stops responding. For example: pressing channel down repeately the screen will freeze and stop moving. I know the receiver is picking up the remote as the remote light on the box flashes.
- On demand stops working. I've had to hard reset these boxes a couple of time in order to get the xfnity guide to show up. One time I had what I will call a 'ghost' screen where the bottom half of my tv was dark as if the menu was on screen but it wasn't
- generally the poor Remote performance is the biggest issue I've run into.
3.) Xfinity Modem. I rented my modem / router in one box from comcast. I was really please with it as it had enough wifi coverage for my entire house (which is hard to do in a tri-level home). One morning I woke to no internet and called comcast which I was told to take my router to the comcast store and have it replaced (That's if I wanted it work anytime soon). So I did, however they did not have the same modem so I opted to take an old modem and use my old wifi router. The replacement model didn't work at all so I decided to buy my owe modem which works fine.
(Warning: I believe what cause the falure of the first modem was a software update that assumed the network ip setting were the defaults. I changed my IP addressing to my own settings including the dhcp setting and i think what happened is comcast pushed a software update that assumed the setting were factory messing up my network. Hey comcast, don't allow me to change if code pushes are going to break it!)
I've had Comcast out twice to look at it. The last visi was a waste of time. The guy said "just reset all your devices, that is the only solution we have at this time". (not a good answer). I was also told the entire X1 service had crashed just 4 days before my service call and the tech has been working not stop since then.
I know rolling trucks is one of the most expensive steps for any service provider to take. Comcast has made 1000's of house visits in the past couple of months costing them $$$. Not to mention the $$$ they will need to throw at fixing the archetecture / infrastructure. .
In the end, I believe a constaint / persistance connectivity with X1 application controllers is causing a great deal of the issue. It presumes / demands a consistant response time that is clearly either a.) under designed for the demands or b.) Comcast underestimate the lacancy issues and the impacts it will have on devices.
(These issues can be difficult to find in a lab environment, difficult to replicate 100K - 1Million connectsion at the same time in a room the size of most peoples living room. If you are having simular problems , you are now apart of a larger , real world test lab 🙂 )
I hope X1 team can find and resolve the issues. My family is growing tired of it and asking about U-verse or Direct TV. I'm frankly tired of being my own comcast tech and being mr IT in my house.
My offer to you Comcast, in an effort to resolve the issues quickly, I'm willing to be a test site for new code pushes prior to a broader deployment.
0
IceHippo
Contributor
•
25 Messages
9 years ago
Still having these same problems.
When are things supposed to go back to normal?
0
treesm
New Poster
•
1 Message
9 years ago
have the same issues
-lip sync
-act like double or more button presses
-takes long time to change channel
this always seems worse in the eventing
0
0
03054nhcust
Frequent Visitor
•
7 Messages
9 years ago
ComcastGwen It's going on 2 weeks since the problems with the X1 DVR guides and DVR lockups have started. I thought your so called engineers have found the issues? I tried to watch a hockey game last night and had the stupid popup box in the middle of the screen off and on throughout most of the game. I'm sick of paying for this crappy service!! Somebody needs to post some answers ASAP. I'm sure I'm not the only one loosing patients.
0
0
gotpizza
Problem Solver
•
2.8K Messages
9 years ago
is the popup box the sports app or something else?
0
0
fisherman-bob
New Poster
•
4 Messages
9 years ago
Don't blame nothing but problems here and the BOLONY you go thru to talk with a tech is rediculous
0
0
gotpizza
Problem Solver
•
2.8K Messages
9 years ago
Bob what are your issues?
0
0
driveway2
Contributor
•
20 Messages
9 years ago
So Comcast has evidently decided to go ahead and schedule malfunctions each Wednesday night around 8:00 pm EST. This is the THIRD Wednesday night in a row that at 8:00 our main X1 box stops working. Won't do a thing. Can't even turn it off. Have to pull the plug for at least 10 minutes and then hope that you only have to do it once. So, anything we have set to tape at 8:00 on Wednesdays is toast. Takes about a half hour to get it rest and running again. Thanks, Comcast. Tell me again why I'm paying you $200 a month?
0
freednerd
New Poster
•
1 Message
9 years ago
I have also been having problems since installation. Sometimes have to reset the box 4 or 5 times a day; sometimes it restarts itself while in the middle of a show. Volume goes out for no reason and have to unplug/replug to get it back or I get the "No connection to the DVR" message. My Mocca Diagnostics say this:
(4 Lines- I have the X1 and three other boxes)
.267266263
266. 271261
267272.268
26827268
Does this seem like a signal issue?
0
Rustyben
Expert
•
24.6K Messages
9 years ago
um... today is thursday
0
Sethocfreak
New Poster
•
1 Message
9 years ago
Did you ever get this resolved? I keep having the same exact issues where the X1 shows the RDK error and won't do anything. Reboot the machine and then it works for around 20-30 minutes. Then begins again. At the same time, my internet connection goes out. This is a constant battle.
0
driveway2
Contributor
•
20 Messages
9 years ago
Yes, I know it's Thursday. It happened last night. And last week on Wednesday. And the previous Wednesday.
0
0
gotpizza
Problem Solver
•
2.8K Messages
9 years ago
Ray we have all been there at one time. There is a reason that people get so frustrated with Comcast, they are just too big!!
What they need to do re open the call centers in every area they serve. Also they need to have better communication with local dispatch. There is nothing worse than calling the cable company and getting someone who does not even live in your state, and has no local knowledge of outages etc..
I remember the days when i would call Comcast and give the agent my phone number. They would say something like "the line tech Tommy is already working on the issue"! Those days are past. To top that off now we have x1 which when there are server issues the local people may not even know that there are issues with that...It is a mess, and I think it is time they restructure their company.....Starting with the call centers...I would rather wait on hold a few minutes longer knowing that I get someone in my town or even same state...
That is my spin the whole issue!!
Pizza out!!!
0
0
geek46
Expert
•
18K Messages
9 years ago
Shane,
We are expeiencing a rash of HIT & RUN forum members.... wanting nothing more than a place to VENT thier frustrations...
Instead of reading/searching/exploring they would rather shout, complain and curse out those willing to help not realizing that we TOO have or are experiencing the same things they are. Don't know about you, but this has made me turn away from helping those who we could reach...
Steppping off soap box now.... back to regular programming.
-=Ray=-
0
0
geek46
Expert
•
18K Messages
9 years ago
Correct-o-mondo....
Not to mention that in a lot of instances, the existing infrastructure cannot support the X1 and the TECHs shouldn't even bother trying.... IMO, everyone's initial dealings with Comcast begin with the INSTALL..... an INSTALL that should never have been completed because of issues only adds fuel to the ever-growing fire....
Just my 2 cents worth thrown on top of yours!!!
Have a great weekend Shane!
-=Ray=-
0