user_qg3cz4 To fix a Xfinity box stuck in a voice guidance loop during setup, perform a hard reboot by unplugging the power for at least 60 seconds. If that fails, factory reset the remote by holding 'A' and 'D' simultaneously until the light turns green, then press 9-8.
@user_mdnaxs Did you follow the steps we mentioned? If so, what happens after rebooting?
I am an Official Xfinity Employee. Official Employees are from multiple teams within Xfinity: CARE, Product, Leadership. We ask that you post publicly so people with similar questions may benefit from the conversation. Was your question answered? Please mark as Best Answer.
This is thread number seven I have read, plus some YouTube videos and other websites. Sucks that this has been a known problem for 4 years with no resolution. I have had my flex box with no issues for over a year and i come home today, turn on the tv, and it doesn’t work. I did everything- I reset my internet modem, I unplugged my flex box, I plugged my flex box back in while holding down the two arrow buttons on the back of the flex box (WSP), I’ve even unpaired my remote (XR100 remote unpaired by pushing back arrow & plus sign at the same time, beeps, then pushing 981, which makes more beeps), and I even tried the suggestion of putting your remote on top of the box when try to say no/ press no to voice guidance. No luck. Will report back if I ever do find doe magical fix :(
XfinityTommy
Official Employee
•
3K Messages
5 months ago
user_qg3cz4 To fix a Xfinity box stuck in a voice guidance loop during setup, perform a hard reboot by unplugging the power for at least 60 seconds. If that fails, factory reset the remote by holding 'A' and 'D' simultaneously until the light turns green, then press 9-8.
2
0
user_3zorau
Visitor
•
1 Message
13 hours ago
This is thread number seven I have read, plus some YouTube videos and other websites. Sucks that this has been a known problem for 4 years with no resolution. I have had my flex box with no issues for over a year and i come home today, turn on the tv, and it doesn’t work. I did everything- I reset my internet modem, I unplugged my flex box, I plugged my flex box back in while holding down the two arrow buttons on the back of the flex box (WSP), I’ve even unpaired my remote (XR100 remote unpaired by pushing back arrow & plus sign at the same time, beeps, then pushing 981, which makes more beeps), and I even tried the suggestion of putting your remote on top of the box when try to say no/ press no to voice guidance. No luck. Will report back if I ever do find doe magical fix :(
0
0
XfinityMichaelC
Administrator
•
5.2K Messages
1 hour ago
Closing post due to age.
0
0