About Andrew32

I decided to upgrade from my SB6141 modem and also had some speed issues or at least some weird ones.   1st the speed tests I have run:   via a wired connection: http://speedtest.xfinity.com/results/JQ93T0B0QWTUCPN   says that I'm getting 50 mbps download and 10.6 mbps download for upload I'm supposed to be getting 150 mbps with my plan     But via my smartphone it's says I'm getting those speeds:  http://speedtest.xfinity.com/results/JQ93JPPC6Q4YMOD   I even direct plugged the modem into my laptops and all said that I was getting was the very low speeds as much 50 mbps   I'm using a Extreme 3 way unbalanced Splitter as I have two tvs, the modem on the unbalanced part and that's the only splitter I have no other ones on the line. Checked everthing for corrison etc.    Here's my modem status: Version:1.0 StartHTML:000000203 EndHTML:000025331 StartFragment:000002977 EndFragment:000025287 StartSelection:000003007 EndSelection:000025228 SourceURL:http://192.168.100.1/MotoConnection.html Motorola Cable Modem : Status -> Connection Connection    Startup Sequence        Startup Step Status Comment Startup Step: The Startup Sequence shows steps in your Cable Modem's registration process. If your modem doesn't come online, you can often tell which step is causing a problem by noting the first step that remains In Progress.       Acquire Downstream Channel 471000000 Hz Locked Acquire Downstream Channel: The first step your cable modem takes is to lock on a downstream channel. If this step fails, it could be because there is no live coax cable connected to your modem, or because the signal is too weak or noisy to connect successfully.       Upstream Connection OK Operational Upstream Connection: The next step is to establish an upstream connection. If this step fails, it could be because the quality of the cable connection is marginal. (This step is sometimes referred to as the Connectivity State. This reflects negotiation of upstream frequency, time slot, synchronization for Forward Error Correction framing, and similar items.)       Boot State OK Operational Boot State: In this step, your cable modem receives an IP Address and time of day information from the network. If this step fails, it may be because of a network issue, or a problem with your account.       Configuration File OK d11_m_mb8600_speedtierextreme2_c01.cm Configuration File: In the next step, your cable modem receives a configuration file from the network. This file configures your cable modem for the service level that you subscribe to. If this step fails, it could be because there is a problem with your account.       Security Enabled BPI+ Security: Finally, your cable modem exchanges tokens with your service provider to protect your Internet traffic. It is rare for this step to fail.       Connection Status        System Up Time 0 days 09h:45m:03s.00   System Up Time: How long your cable modem has been connected to the Internet.       Network Access Allowed   Network Access: Network Access indicates whether your cable company lets you access the Internet. If you are connected but do not have access to the Internet, there may be a problem with your account.       Downstream Bonded Channels   Downstream Bonded Channels: Your cable modem is capable of connecting over multiple channels at the same time. When at least two channels are connected, this is called channel bonding. The Downstream Channel List shows the connection status of each channel, including indicators of connection quality. Channel bonding enables faster download speeds, and it also helps to smooth out spikes in traffic by spreading them across multiple channels.       Channel Lock Status Modulation Channel ID Freq. (MHz) Pwr (dBmV) SNR (d Corrected Uncorrected 1 Locked QAM256 1 471.0 -0.1 44.4 372 503 2 Locked QAM256 2 477.0 -0.1 44.0 17379 16837 3 Locked QAM256 3 483.0 -0.2 44.1 12538 18271 4 Locked QAM256 4 489.0 -0.2 43.6 612239 666660 5 Locked QAM256 5 495.0 -0.2 44.0 57640 27933 6 Locked QAM256 6 501.0 -0.1 44.1 12257 19415 7 Locked QAM256 7 507.0 -0.1 44.0 11044 17424 8 Locked QAM256 8 513.0 -0.1 43.9 67160 54474 9 Locked QAM256 9 519.0 -0.3 43.8 11105 20330 10 Locked QAM256 10 525.0 -0.5 37.3 141633 143972 11 Locked QAM256 11 531.0 -0.6 39.4 112809 101640 12 Locked QAM256 12 537.0 -0.9 42.7 50872 61316 13 Locked QAM256 13 543.0 -1.0 42.1 93400 106073 14 Locked QAM256 14 549.0 -1.1 42.7 476018 389146 15 Locked QAM256 15 555.0 -1.4 38.5 33391 33640 16 Locked QAM256 16 561.0 -1.5 39.2 51786 32146 17 Locked QAM256 17 567.0 -1.2 41.5 164146 185601 18 Locked QAM256 18 573.0 -1.2 42.9 1689202 1443681 19 Locked QAM256 19 579.0 -1.1 42.7 28002 37093 20 Locked QAM256 20 585.0 -1.1 40.2 79182 92122 21 Locked QAM256 21 591.0 -0.8 42.1 784109 209953 22 Locked QAM256 22 597.0 -0.6 43.2 11435 21069 23 Locked QAM256 23 603.0 -0.4 43.2 11390 17195 24 Locked QAM256 24 609.0 -0.6 43.1 10182 15823 25 Locked QAM256 25 615.0 -0.5 42.8 10481 16209 26 Locked QAM256 26 621.0 -0.1 43.0 10805 18081 27 Locked QAM256 27 627.0 -0.3 43.2 10544 20563 28 Locked QAM256 28 633.0 -0.8 42.9 9371 13856 29 Locked QAM256 29 639.0 -0.7 43.0 9263 12901 30 Locked QAM256 30 645.0 -0.8 42.9 9777 13985 31 Locked QAM256 31 651.0 -0.9 42.8 9587 14254 32 Locked QAM256 32 657.0 -1.1 42.8 9931 20466 33 Locked OFDM PLC 159 690.0 -0.8 41.0 0 0    Upstream Bonded Channels   Upstream Bonded Channels: Similar to downstream channel bonding, upstream channel bonding enables faster speeds. Upstream channel bonding also helps to smooth out spikes in traffic by spreading them across multiple channels. The Upstream Channel List shows the connection status of each bonded channel, including indicators of connection quality.       Channel Lock Status Channel Type Channel ID Symb. Rate (Ksym/sec) Freq. (MHz) Pwr (dBmV) 1 Locked SC-QAM 3 5120 23.0 44.3 2 Locked SC-QAM 1 5120 35.8 45.3 3 Locked SC-QAM 2 5120 29.4 45.3 ... View more