Visitor
•
2 Messages
XFI XB8-T with Allied Telesis AT-GS970M/10PS
Switch connection is directly connected to a port in the back of XB8-T
1. Having issues with DHCP.
2. Devices plug into the switch is not getting a DHCP address from the XB8-T
3. The address is APIPA 169.
Tested other Brand switches - same.
XfinityAmandaB
Official Employee
•
3.4K Messages
5 hours ago
If you have a two-box setup that you are trying to use your equipment to replace a portion of, we do have to make additional adjustments on our end to enable your device to work in place of ours.
0
0
user_zyrmwa
Visitor
•
2 Messages
2 hours ago
Hello and thank you for the info.
@XfinityAmandaB
I am simply using the switch as a L2 flat switch. We do not need to put it on a bridge mode. I would like to use the xfi as the main router/modem and provide the dhcp addresses to the devices that are connected to the allied telesis switch. I have confirmed that the switch has the right configuration. Thank you and please advise.
(edited)
1
0