Contributor
•
238 Messages
Turning off MOCA
By default the MOCA is disabled, i enabled moca for just a test & now i cant disable it just keeps turning back on.There has to be a way to disable it.
Contributor
•
238 Messages
By default the MOCA is disabled, i enabled moca for just a test & now i cant disable it just keeps turning back on.There has to be a way to disable it.
kman1399
New Poster
•
3 Messages
4 years ago
Just had the same issue myself on an XB6. You have to disconnect the Coaxial cable from the XB6, but leave the ethernet plugged in so you can get to the gateway admin interface. Once the Coax Cable is disconnected from the XB6, disable the MoCA. It will say disabling for about 20 seconds, then it will actually stick. Afterwards you will need to reboot the XB6
0
0
minitech
Contributor
•
238 Messages
4 years ago
Tried something similar with ad. rep. on line and would stay disabled for a short time then revert back.I think it has something to do if you have a xg1 box on your acct.I use a poe filter on the xg1 box to isolate it from the gateway so my xi6 will run i.p. only.
0
0