I am in the same boat now, however my solution doesn't seem so easy. I am trying to get an IP Camera onto my network, but it doesn't support 5g. I know it SHOULD be able to just connect to 2.4, but the instructions specifically say that two networks with the same UID (as required by Xfinity) confuses the system and will not allow a connection.
I am in NEED of being able to disable my wifi. As this was the only option still active in the router's web admin (Enable, Disable) I tried that but using a wifi analyzer shows that it is still active. There is no control for this than I can find on the online xfi system.
Please create a new topic of your own here on this board detailing your issue. Thanks. 10-month-old dead thread now being closed.
I am not a Comcast Employee. I am a Customer Expert volunteering my time to help other customers here in the Forums. We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Please mark an Accepted Answer!
Andyr1
Gold Problem Solver
•
7.9K Messages
4 years ago
There should be no need to turn it off. If a device only support 2.4GHz, then it will only see that signal.
0
0
GV11
New Poster
•
2 Messages
4 years ago
0
0
darkangelic
Gold Problem Solver
•
2K Messages
4 years ago
Good to hear, thanks for the update. Feel free to post here again should you need additional help.
0
revgolem
Visitor
•
1 Message
4 years ago
I am in the same boat now, however my solution doesn't seem so easy. I am trying to get an IP Camera onto my network, but it doesn't support 5g. I know it SHOULD be able to just connect to 2.4, but the instructions specifically say that two networks with the same UID (as required by Xfinity) confuses the system and will not allow a connection.
I am in NEED of being able to disable my wifi. As this was the only option still active in the router's web admin (Enable, Disable) I tried that but using a wifi analyzer shows that it is still active. There is no control for this than I can find on the online xfi system.
What do I do?
1
0