U

Visitor

 • 

5 Messages

Tuesday, May 18th, 2021 4:29 PM

Closed

Slow Speeds Through Switch

When I connect directly to the Xfinity modem/gateway (via a 3 foot CAT 6 cable) I get about 945 MBS; OK, good. 

When I connect with the same computer through a Gigabit switch (TL-SG108E, a true duplex Gigabit smart managed switch) I get 92 MBS.

All cables are short CAT 6 cables, the modem has been power cycled. 

I can't figure out why the thru-put of the switch is not better.  I also tried an unmanaged switch with the same results.   Any suggestions would be appreciated.

This conversation is no longer open for comments or replies and is no longer visible to community members.

Expert

 • 

111.5K Messages

4 years ago

First. Ensure that any and all QoS features are disabled.

Visitor

 • 

5 Messages

OK.  The current QoS is set at: "DSCP/802.1P Based".

My other options are: "Port Based" or "802.1P Based"; no 'Disable' option is listed.

Let me know which is 'best', or I can try the other 2 if in doubt.

BTW, I have the same problem with an unmanaged switch.  Up graded to this one to make sure is was Gigabit duplex (both directions).

Thanks for the reply, much appreciated.        ...........  Tom  ..........

Visitor

 • 

5 Messages

I found the problem was a shorted CAT 6 cable.  Fixed that and all is well.

Expert

 • 

111.5K Messages

4 years ago

Thanks for posting back with the fix ! Now closing your topic.

forum icon

New to the Community?

Start Here