2 Messages
Seemingly fine downstream and upstream channels, but no WAN IP
From my meager research, the below downstream and upstream channel details look "normal". If others agree, any idea why I am not getting a WAN IP?
Procedure Status Comment
Acquire Downstream Channel 561000000 Hz Locked
Connectivity State Ok Operational
Boot State Ok Operational
Security Enabled BPI+
IP Provisioning Mode Honor MDD honorMdd(4)
Downstream Bonded Channels
Channel Lock Status Modulation Channel ID Frequency Power SNR Correctables Uncorrectable
1 Locked QAM 256 13 519000000 Hz 0.5 dBmV 40.3 dB 2 0
2 Locked QAM 256 14 525000000 Hz 0.4 dBmV 40.3 dB 0 0
3 Locked QAM 256 15 531000000 Hz 0.5 dBmV 40.9 dB 0 0
4 Locked QAM 256 16 537000000 Hz 0.4 dBmV 40.3 dB 0 0
5 Locked QAM 256 17 543000000 Hz 0.4 dBmV 40.3 dB 0 0
6 Locked QAM 256 18 549000000 Hz 0.0 dBmV 38.9 dB 0 0
7 Locked QAM 256 19 555000000 Hz 0.0 dBmV 38.9 dB 0 0
8 Locked QAM 256 20 561000000 Hz -0.4 dBmV 38.9 dB 0 0
9 Locked QAM 256 21 567000000 Hz -0.5 dBmV 40.3 dB 0 0
10 Locked QAM 256 22 573000000 Hz -1.0 dBmV 38.9 dB 3 0
11 Locked QAM 256 23 579000000 Hz -1.0 dBmV 38.9 dB 2 0
12 Locked QAM 256 24 585000000 Hz -1.0 dBmV 40.3 dB 1 0
13 Locked QAM 256 25 591000000 Hz -1.2 dBmV 40.3 dB 1 0
14 Locked QAM 256 26 597000000 Hz -1.2 dBmV 40.3 dB 3 0
15 Locked QAM 256 27 603000000 Hz -1.2 dBmV 38.9 dB 0 0
16 Locked QAM 256 28 609000000 Hz -1.2 dBmV 38.9 dB 0 0
17 Locked QAM 256 29 615000000 Hz -1.2 dBmV 38.9 dB 0 0
18 Locked QAM 256 30 621000000 Hz -1.2 dBmV 38.9 dB 0 0
19 Locked QAM 256 31 627000000 Hz -1.0 dBmV 38.9 dB 0 0
20 Locked QAM 256 32 633000000 Hz -1.2 dBmV 38.9 dB 0 0
21 Locked QAM 256 33 639000000 Hz -1.0 dBmV 38.6 dB 0 0
22 Locked QAM 256 34 645000000 Hz -1.2 dBmV 38.9 dB 0 0
23 Locked QAM 256 35 651000000 Hz -1.0 dBmV 38.9 dB 0 0
24 Locked QAM 256 36 657000000 Hz -1.0 dBmV 38.9 dB 0 0
25 Not Locked N/A N/A 0 Hz 0.0 dBmV 0.0 dB 0 0
26 Not Locked N/A N/A 0 Hz 0.0 dBmV 0.0 dB 0 0
27 Not Locked N/A N/A 0 Hz 0.0 dBmV 0.0 dB 0 0
28 Not Locked N/A N/A 0 Hz 0.0 dBmV 0.0 dB 0 0
29 Not Locked N/A N/A 0 Hz 0.0 dBmV 0.0 dB 0 0
30 Not Locked N/A N/A 0 Hz 0.0 dBmV 0.0 dB 0 0
31 Not Locked N/A N/A 0 Hz 0.0 dBmV 0.0 dB 0 0
32 Not Locked N/A N/A 0 Hz 0.0 dBmV 0.0 dB 0 0
Upstream Bonded Channels
Channel Lock Status US Channel Type Channel ID Symbol Rate Frequency Power
1 Locked ATDMA 4 5120 Ksym/sec 17300000 Hz 36.8 dBmV
2 Locked ATDMA 3 5120 Ksym/sec 23700000 Hz 36.8 dBmV
3 Locked ATDMA 2 5120 Ksym/sec 30100000 Hz 37.0 dBmV
4 Locked ATDMA 1 5120 Ksym/sec 36500000 Hz 37.8 dBmV
5 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 0.0 dBmV
6 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 0.0 dBmV
7 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 0.0 dBmV
8 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 0.0 dBmV
Downstream OFDM Channels
Channel Lock Status Modulation/Profile ID Channel ID Frequency Power SNR/MER Active Subcarrier
Number Range Unerrored
Codewords Correctable
Codewords Uncorrectable
Codewords
1 Not Locked 0 0 0 Hz 0.0 dBmV 0.0 dB 0~4095 0 0 0
2 Not Locked 0 0 0 Hz 0.0 dBmV 0.0 dB 0~4095 0 0 0
Upstream OFDMA Channels
Channel Lock Status Modulation/Profile ID Channel ID Frequency Power
1 Not Locked 0 0 0 Hz 0.0 dBmV
2 Not Locked 0 0 0 Hz 0.0 dBm
EG
Expert
•
106.9K Messages
2 months ago
Have you first tried power-cycling / re-starting the modem by unplugging it for a minute ?
1
0
EG
Expert
•
106.9K Messages
2 months ago
Ok so the signal values that you posted are all good, but the modem appears to be only locking in 24 downstream channels. Perhaps there is some sort of a signal / line imairment somewhere.
There are other signal stat values that can't be read by the modem. They are the "Upstream Rx Power" (Upstream Receive Power Level), the "Upstream SNR Ch." (Upstream Signal To Noise Ratio), and the "Upstream ICFR" (In Channel Frequency Response). These are as equally important in diagnosing connectivity issues as are the modem's stats.
I'm going to escalate your issue to the Comcast corporate employees (The Digital Care Team) who are available to these boards. They will be able to poll the CMTS (Cable Modem Termination System) to check for any real-time degradation and / or error reports, see your node / cable plant, and modem health, and see whether or not everything is in the green zone. They can also see a history plot for the modem and those upstream receive signal stats.
You should get a reply here in your topic. Good luck !
0
0