Visitor

 • 

2 Messages

Sunday, December 28th, 2025 6:07 AM

Persistent Packet Loss & Upstream Node Issue — Modem & Splitter Replaced, Still Losing Packets

Hello — I’m experiencing intermittent packet loss and service disruptions that are confirmed via diagnostics to occur upstream of my home network, and I need help escalating this to a network/node maintenance ticket.

I have already:

  • Replaced the modem with a new unit through an onsite tech visit
  • Replaced the splitter and coax cable from the splitter to the modem
  • Installed a 2.5 Gbps PCIe network adapter and Cat6/Cat8 cabling
  • Verified no internal packet loss or hardware issues

Test results show:

  • Clean pings to 10.0.0.1 and LAN devices
  • Pathping diagnostics show ~95–100% packet loss at the first Comcast hop (upstream node / CMTS)
  • Speeds reach ~2400 Mbps on my 2.1 Gbps plan, but packet loss persists
  • Work-from-home video calls and stable connections are still impacted

This issue is not a premise problem, nor is it related to my equipment or wiring at home.

Please escalate this to network maintenance / line maintenance so the upstream path (tap/node/CMTS) can be investigated for noise, ingress, or failure.

Thanks.

Oldest First
Selected Oldest First

Visitor

 • 

2 Messages

13 hours ago

Diagnostic Summary (Confirmed Upstream Issue)

Service Address: Doral, FL 33178

Connection: Wired (2.5 Gbps PCIe NIC, Cat6/Cat8)

Gateway: Xfinity Gateway (recently replaced by technician)

PACKET LOSS TESTING

Command used: code:”pathping 8.8.8.8”

 

Results observed:

  • Hop 1 (10.0.0.1 / Gateway): 0–1% packet loss
  • Hop 2 (First Comcast node / CMTS): ~95–100% packet loss
  • Packet loss begins upstream of the modem, not inside the home

This confirms the issue is occurring on Comcast’s network side, not customer equipment.

GATEWAY / SPEED DIAGNOSTICS

  • Plan speed: 2100 Mbps
  • Speed to Gateway (Xfinity app):
    • Before replacing splitter/coax: ~1200–1300 Mbps
    • After replacing splitter & coax: ~2400 Mbps (116% of plan)

Throughput improved, but packet loss persists, indicating upstream noise or node instability rather than bandwidth limitation.

CUSTOMER-SIDE TROUBLESHOOTING COMPLETED

  • Modem replaced by Xfinity technician
  • Coaxial connection replaced by technician
  • Splitter replaced
  • New 2.5 Gbps PCIe network card installed
  • Ethernet cables replaced and tested
  • Local network tests clean

All customer-side equipment and wiring have been ruled out.

IMPACT

  • Intermittent packet loss disrupts work-from-home video calls
  • Real-time traffic affected despite high throughput
  • Issue is intermittent, consistent with node ingress or upstream noise

REQUEST

Please escalate this issue to Network / Line Maintenance to investigate:

  • Upstream noise or ingress
  • Failing tap or amplifier
  • Node / CMTS instability
  • Outside plant signal quality

A premise technician visit has already occurred and did not resolve the issue.

forum icon

New to the Community?

Start Here