U

Visitor

 • 

4 Messages

Monday, June 30th, 2025 9:37 PM

Closed

My wifi went off-line three days ago--how can I get it restored? Ready to switch providers

Last Friday, I experienced an outage. When Xfinity let me know that service was back online, I was no longer able to access wifi. 
Since Friday, I have tried to receive help from the "Assistant" which is incredibly limited and frustrating. I've texted with multiple techs and, when I've lucked into it, I've spoken on the phone at least one tech, maybe two.

It's now Monday. I just had another hour-long session with two techs who seemed to be doing their best to try to help, but I'm still without wifi. Oh, and I took my Gateway modem back to the Xfinity store, where I was issued a new one. Same problems.

My husband and I have spent no fewer than 10-12 hours over the weekend and today trying to get help troubleshooting this problem. Now, we've been told that an in-person technician has been scheduled to come to our house on Thursday--earliest appointment available. By Thursday, it will be a week without wifi. Unacceptable!

The problem? Here's what it looks like to me: Xfinity says that we can use a customer-provided router with the Gateway when bridge mode is on. This is how we've been successfully operating for 6 months. On Friday, when service was restored, we suddenly became unable to operate with our router (using the Xfinity Gateway in bridge mode). We've replaced both the modem (Gateway from Xfinity) and router (probably didn't have to purchase a new one since nothing has changed). No wifi.

It appears that Xfinity is trying to eliminate our ability to use our own router so that we are forced into renting Xfinity extenders. It's a racket!

Our wifi was working fine before the outage Friday. After the outage, not working. WHAT CHANGED????? New protocols that limit our router's ability to receive a signal from Xfinity's Gateway?

The automated assistant is worthless and frustrating. The chat agents are trying but unable to resolve it. The phone agents are nearly impossible to get to, and are largely unhelpful. I have to wait until Thursday for an in-person tech, and I'm not hopeful.

My only real option is to find a new provider.

Accepted Solution

Visitor

 • 

4 Messages

1 day ago

UPDATE: After additional hours working to restore our network, we now have it up and running. Not easy or intuitive and counter to what we were told by agents. But we're restored.

Visitor

 • 

4 Messages

2 days ago

To make matters worse, I just got a text with the following:

  • "Through routine monitoring of the health of your network, everything looks good. If your issue is resolved, you can reply X to cancel your appointment. Text Help or Stop Msg&DataRatesMayApply"

There is no recognition that I have a problem. Although my modem is registering a signal coming into the house, I'm unable to use my router to broadcast a signal--something which Xfinity advertises that I can do. 

My problem is NOT resolved!

Expert

 • 

111.4K Messages

1 day ago

Would you please share with the community what the fix was so that all readers here may benefit ? Thank you !

Visitor

 • 

4 Messages

Sure. THE FIX:

I was told at the xfinity store that I could manage the entire installation using bridge mode in the Xfinity app. This is not true.

It was also not helpful to work with the xfinity assistant or support agents, as every time they interacted with our network, we experienced different issues.

The fix was to do a factory reset on my Gateway modem.

Then, use the app to create a wifi name and password. 

Once that's done, plug in the router.

**Super important not to have the Gateway connected by ethernet to any other device. I had done this to test the connection, but having another device plugged in created problems. Even after you unplug the additional device, the Gateway "remembers" it, and it causes problems. If you plug in another device directly to the Gateway, you need to start over with a factory reset of the Gateway.

To toggle the Gateway into bridge mode: Using a device connected to your home network, open a web browser and go to the Admin Tool at http://10.0.0.1.

The order of operations is very important.

Use this article for more information: https://www.xfinity.com/support/articles/wireless-gateway-enable-disable-bridge-mode

Expert

 • 

111.4K Messages

1 day ago

@user_mwko7b 

Thanks for replying ! It will hopefully help someone in the future ! Now closing this topic.

forum icon

New to the Community?

Start Here