3 Messages
MT8733 upstream stuck at ~6 Mbps, same as an old thread
I'm hitting the exact same problem as this thread: https://forums.xfinity.com/conversations/your-home-network/upstream-only-6mbps-with-motorola-mt8733-provisioning-problems-12gig-service-plan/6620501312df8b16cf69f155
Motorola MT8733, plan 1000/100. Download is fine (~650 Mbps), but upload is stuck at ~6 Mbps.
Already ruled out the usual stuff: signal is clean (upstream 42–44 dBmV, 0 uncorrectable), tested wired directly to the modem (not Wi-Fi), line already fixed by a tech, and I've power-cycled several times. My event log also shows "UCD invalid or channel unusable."
Same as that thread, how should I handle this?
XfinityDemetrise
Official Employee
•
327 Messages
4 hours ago
Hi there. Thank you so much for reaching out. I'll be happy to assist. Can you confirm when did this issue first begin?
2
0
EG
Expert
•
119.5K Messages
3 hours ago
@XfinityDemetrise @user_x7kjgj
Be advised that sending an unrequested direct message to the support team is a violation of their forum guidelines. It may get ignored.
Please see this post about direct messaging the support team;
https://forums.xfinity.com/conversations/getting-started/direct-message/6445fb0eb9339b2013e8ff9c?commentId=6446bf50b9339b2013e93478
0
0