Visitor
•
1 Message
Motorola MT8733 issues with Upstream and downstream speeds on 2000Mbps plan
I just recently upgraded my plan and in turn replaced my Netgear C7000 to a Motorola MT8733 in order to support the increased speeds.
After a couple interactions with both chat support and phone support, all they have done is send reset signals to my modem.
There seems to be a 2 year old post from a user stating that this is likely a provisioning issue given that "the supported upstream frequency range of the Motorola MT8733 is switchable between
5-42 MHz and 5-85 MHz (sub-split and mid-split) and is not compatible with high-split (5-204 MHz). This means that Xfinity will have to provision your device either for sub-split or mid-split and not for high-split."
I've also confirmed it is not a hardware issue with Motorola.
Is there a specific customer support team that I can reach out to resolve this issue?
BruceW
Gold Problem Solver
•
27.3K Messages
3 hours ago
What speeds are you getting, and how are you measuring them?
Note that Comcast/Xfinity rates the MT8733's download speed at 2.33 Gbps, but it isn't compatible with their "enhanced" upload speeds: upload will be limited to 35 Mbps or so. Follow the "See all modems" link near the bottom of https://www.xfinity.com/support/internet/customerowned, and then check the devices listed under the "Compatible modems for enhanced speeds" heading. The MT8733 is not on that list.
Also note that the company does not yet use "high-split"; many areas have been upgraded to mid-split, and a few are still using sub-split.
The MT8733 should be able to provide the 2000 Mbps download speed you are subscribed to, but upload speed with that device will be limited.
0
0