2 Messages
Lan ipv6 on my xb7
So under advanced settings on my xb7, i go under LAN, and only see ipv4...Also, under DNS servers i only see one for ipv4...is this normal or am i not connecting via ipv6?
2 Messages
So under advanced settings on my xb7, i go under LAN, and only see ipv4...Also, under DNS servers i only see one for ipv4...is this normal or am i not connecting via ipv6?
EG
Expert
•
107.5K Messages
10 days ago
Try this test to see if your gateway device is at least getting an IPv6 address assigned to the WAN. https://test-ipv6.com/
(edited)
0
0
user_k4xj1p
2 Messages
10 days ago
Did the test, says my readiness is 10/10.....there is only one green checkmark the rest are blue exclamation points
1
0
EG
Expert
•
107.5K Messages
10 days ago
Ok, so those are not "exclamation points". They are i's, which stands for information. You've got 10 for 10 so you are being assigned an IPv6 public / WAN IP address. You should have dual stack so you should see both an IPv4 and an IPv6 address. Whether or not that IPv6 is being propagated / delegated to the LAN clients is a another story.
In your computer's network adapter settings you should see something similar to this;
The bottom IPv4 addresses for you will not look like mine. Your XB7 addresses will begin with 10.0.0.xxx
0
0