Currently I set it up with DNS and that seems to work, as far as I can tell. My options are Auto Detect, 6to4 Tunnel, Pass Through, Fixed, PPoE, Auto Config, and 6rd Tunnel. Not sure what SLAAC with RA's is. I have an IPv6 address from the WAN server and an IPv6 address for the LAN.
You used the term "protocol". Well, if you already have an IPv6 IP address then you're all set. Which of those "options" are you using ? Auto detect or auto config would apply most.
EG
Expert
•
111.4K Messages
14 days ago
SLAAC with RA's is the simplest approach.
1
0
EG
Expert
•
111.4K Messages
14 days ago
You used the term "protocol". Well, if you already have an IPv6 IP address then you're all set. Which of those "options" are you using ? Auto detect or auto config would apply most.
(edited)
1