Visitor

 • 

2 Messages

11/16/2026 1:18 AM

How to make the yellow blinking light stop and become white solid light

It's only been flashing a yellow blinking light since I received it in the mail 

Oldest First
Selected Oldest First

Visitor

 • 

15 Messages

20 hours ago

A blinking yellow or amber light on an Xfinity Gateway means the device is trying to connect to Xfinity systems, complete an activation, or download a firmware update, but hasn't established a full internet connection yet.

Causes of yellow/amber light blinking:

[1] Boot-up or Activation: The modem is finishing its initial startup sequence or waiting for account provisioning.

[2] Firmware Update: The gateway is downloading a required system update.

[3] Coaxial Signal Issue: A loose cable, a bad splitter, or plugging into an inactive wall outlet is blocking the signal.

[4] Service Outage: There is an active network disruption in your neighborhood. 

Try unplugging power cord from the back of the modem > wait for 60 seconds and plug the power cord back in for the device to boot up lock on to the internet. Ensure that the coaxial cable is finger tight.

Expert

 • 

123.1K Messages

5 hours ago

@user_6duehs 

First. Is this a new service install / new move-in or an existing service ? 

Expert

 • 

123.1K Messages

4 hours ago

In between move-outs and new move-ins, sometimes the other end of the line gets disconnected from the Comcast feed by a tech. It's quite typical. You'll likely need a tech out to reconnect your premises to the active Comcast feed at the tap on the pole or the pedestal. You won't be able to activate the service with the app if your line is not connected to the system. Good luck ! And please post back here with how things turn out.

forum icon

New to the Community?

Start Here