Visitor
•
1 Message
CM3000 – repeated T3 timeouts, SYNC failures, intermittent disconnects
I have a NETGEAR CM3000 (DOCSIS 3.1, firmware V6.01.04) in VA on the 1.2 Gig plan. Download is fine (~1.5 Gbps) and upload is normal for my plan (~38 of 40 Mbps) when stable. The problem is repeated upstream instability:
- Event log: 27+ Critical T3 timeouts over ~33 days and escalating, including "16 consecutive T3 timeouts while trying to range on upstream channel 1 – retries exhausted," plus multiple SYNC timing failures
- Intermittent full disconnects; during these, upload collapses under 2 Mbps and latency spikes to 500ms+
- Upstream transmit power elevated at ~43 dBmV (on a ~10 ft drop, no splitters)
- Downstream clean (31 channels locked, good SNR/power, zero uncorrectables), but the OFDM channel shows very high correctable counts
- A technician already visited and confirmed the outside plant/drop are clean; issue persists
- Modem is on firmware V6.01.04 (successor to the pulled V6.01.03)
Please investigate upstream noise/ingress or a node-side issue, check my return-path SNR, and advise whether a firmware rollback to V5.0.x is possible. Reboots don't resolve it — please escalate beyond tier-1.


XfinityAbby
Official Employee
•
1.1K Messages
6 hours ago
Hello @user_cb0tlj thank you for reaching out on our community forum. Are you noticing these issues during any specific times of the day? Also, when this happens have you attempted any other troubleshooting?
0
0