Visitor

 • 

6 Messages

11/10/2026 4:47 PM

Changing WiFi Password Does Not Disconnect Devices

I have been trying to disconnect a few devices on my Wi-Fi network that I do not recognize. 

After searching for hours and being ignored by the in app Xfinity Assistant, I came across the proposition that changing your Wi-Fi name and password would disconnect all devices. It does NOT do that anymore. 

Are there any other solutions to get this fixed?

Oldest First
Selected Oldest First

Expert

 • 

123.1K Messages

7 days ago

First. Is this a Comcast-rented gateway device ? If so, perhaps your neighbors are inadvertently connecting to your network / gateway device via the MoCA feature that's built into it. MoCA (Multimedia Over Coax Alliance) is an alternate hardwired way to connect devices to a home network if ethernet cabling can not be used/run. It uses the existing coax cable wiring instead of ethernet cabling. 

If the MoCA feature is enabled, and you do not have a PoE (Point of Entry) MoCA filter installed on the coax line, yours, and your neighbor's gateway devices will be able to connect with each other like one big network. 

Disable it if you aren't using it. If you are, install a PoE MoCA filter on the input port of the first splitter off of the street drop to keep the MoCA signal in your premises and to keep the neighbor's signals out. Your neighbors should also have PoE filters installed.

To disable MoCA on your device. First, unplug the coax cable line from the jack on the gateway device. Then go to the gateway login http://10.0.0.1   


Default login info is:
Username: admin (all lowercase)
Password: password


Once in you will find the drop-down on the left of the screen that is labeled “Connections”.

Click the drop down---> click MoCA---> right side of screen click “disable”---> save changes.

Bear in mind that we've seen many posts here that the MoCA feature gets turned back on with their overnight re-boots / updates for the device. The best policy is to be sure to use that PoE filter ! Amazon has them: https://www.amazon.com/SNLP-1GCW-Filter-Eliminate-Multi-Room-Interference/dp/B07SLD9QPH    

Or you may be able to get one for free at your local Comcast / Xfinity store. Or book a tech to come out and install one for you.


If the MoCA feature is not being used on your home network, you can put the PoE filter right at the back of your gateway device instead.

Contributor

 • 

528 Messages

2 hours ago

I think EG told you about MoCA because changing a Wi-Fi password does disconnect all Wi-Fi devices.  So, he assumed the devices were connected in another way.

However, if you look at the connected devices within a router, it probably tells you about all the devices it has seen within a certain period of time.  Now it might make sense to empty that list whenever a Wi-Fi password is changed, but maybe it doesn't.  However, once the "period of time" elapses, then it disappears from the list. (In other words being on that list may not mean it has actual access right now - just that it was seen recently.)

Visitor

 • 

6 Messages

2 hours ago

This is not true. In the Xfinity app, it will ping your phone with a notification if any device joins your network. I was at work and nobody I know was at or near my home when I got a notification that a iPhone 17 connected to my device. I do not own an iPhone 17. The app also shows you what devices are currently connected to your WiFi and that iPhone was connected even after I changed the name and password of my router because I still was unable to make the Xfinity gateway forget that iPhone.

(edited)

Contributor

 • 

528 Messages

How long did it show up after you changed the password? 

Visitor

 • 

6 Messages

For the next four hours. 

After which I unplugged my gateway for the remainder of the day and plugged it back in the following day. Only then was that iPhone disconnected fully and I was able to forget the device from the gateway. 

Contributor

 • 

528 Messages

I could easily imagine devices remaining in that list for four hours after the last time they had any real access.  

Nonetheless I don't see how they would have access.  The Wi-Fi password isn't just a normal password, it's an encryption key.  Devices aren't speaking the same language once it is changed.

How about other devices in your home? (Smart TV, laptops etc.) Did they continue to have access to the internet even after you changed your Wi-Fi password?

Visitor

 • 

6 Messages

No, none of them were connected at the time as I was trying to figure out how/why someone was still on my network and I turn devices completely off when I’m not at home so there are no security vulnerabilities. 

I find it hard to believe that they were not on my network since the app said they were connected with a green light and I was unable to forget their device, even though I was able to forget my own device that was just connected moments before my attempt to forget the intruder. So given that information, they must have still had access to the encryption. 

Regardless, the point is moot as it was solved but not by any typical means. 

As a customer, I would love to see more autonomy on our end. As well as more access to settings and information in the future, rather than relying on external message boards and useless AI agents. 

(edited)

Contributor

 • 

528 Messages

You can certainly buy your own router!  Before you do, I would try a test:  Change the password again.  If your own home devices continue to function, then I would be surprised and a new router might be a good idea.  If they don't, then I think the current router is OK.  BTW, I have never owned an Xfinity-brand router, so I only know that whenever I have changed the password on one of my routers, I have had to go to each device I own and update it there as well.  

forum icon

New to the Community?

Start Here