Visitor

 • 

1 Message

11/10/2026 4:47 PM

Changing WiFi Password Does Not Disconnect Devices

I have been trying to disconnect a few devices on my Wi-Fi network that I do not recognize. 

After searching for hours and being ignored by the in app Xfinity Assistant, I came across the proposition that changing your Wi-Fi name and password would disconnect all devices. It does NOT do that anymore. 

Are there any other solutions to get this fixed?

Oldest First
Selected Oldest First

Expert

 • 

123K Messages

11 hours ago

First. Is this a Comcast-rented gateway device ? If so, perhaps your neighbors are inadvertently connecting to your network / gateway device via the MoCA feature that's built into it. MoCA (Multimedia Over Coax Alliance) is an alternate hardwired way to connect devices to a home network if ethernet cabling can not be used/run. It uses the existing coax cable wiring instead of ethernet cabling. 

If the MoCA feature is enabled, and you do not have a PoE (Point of Entry) MoCA filter installed on the coax line, yours, and your neighbor's gateway devices will be able to connect with each other like one big network. 

Disable it if you aren't using it. If you are, install a PoE MoCA filter on the input port of the first splitter off of the street drop to keep the MoCA signal in your premises and to keep the neighbor's signals out. Your neighbors should also have PoE filters installed.

To disable MoCA on your device. First, unplug the coax cable line from the jack on the gateway device. Then go to the gateway login http://10.0.0.1   


Default login info is:
Username: admin (all lowercase)
Password: password


Once in you will find the drop-down on the left of the screen that is labeled “Connections”.

Click the drop down---> click MoCA---> right side of screen click “disable”---> save changes.

Bear in mind that we've seen many posts here that the MoCA feature gets turned back on with their overnight re-boots / updates for the device. The best policy is to be sure to use that PoE filter ! Amazon has them: https://www.amazon.com/SNLP-1GCW-Filter-Eliminate-Multi-Room-Interference/dp/B07SLD9QPH    

Or you may be able to get one for free at your local Comcast / Xfinity store. Or book a tech to come out and install one for you.


If the MoCA feature is not being used on your home network, you can put the PoE filter right at the back of your gateway device instead.

forum icon

New to the Community?

Start Here