Skip to main content
user_hl11bt
1st Topic

Visitor

 • 

1 Message

Monday, November 3rd, 2025 6:13 PM

2.4ghz Weather Station not able to link with xFI router.

I tried to hook up my 2.4mhz weather station to my xfinity router and kept getting a message that I had to get away from the router with my phone to get it into a 2.4ghz connection. I tried doing that but then my phone is too far away from the weather station to link the router information. I tried separating the signals but that didn't seem to help. I also tried disabling the 5ghz signal and again it didn't help. Please help!

Question

 • 

Updated 

17 hours ago

 • Edited

26

2

0

Oldest First
Selected Oldest First
XfinityGabriel

Official Employee

 • 

2.9K Messages

2 months ago

 

user_hl11bt, Hi there! Thanks for taking the time out of your day to reach out. I can undersand the importance of having your weather station working correctly so your Wi-Fi signal can have a longer range and better wall penetration. You've come to the right team. Our team of experts specializes in resolving wifi concerns over social media. We can help. Thanks for trying that step for separating the signals and disabling the 5 GHz. To troubleshoot a 2.4GHz weather station not linking with an xFI router, ensure the following:
  1. Verify that the WiFi coverage is good in the area.
  2. Check that the 2.4GHz WiFi Mode is set to 802.11 g/n or 802.11n.
  3. Ensure the Security Mode is WPAWPA2-PSK (TKIP/AES).
  4. If there are many WiFi networks, select a non-interfering channel (1, 6, or 11).
  5. Place the router centrally and elevated for better coverage.
  6. “Forget” the network on the weather station and attempt reconnection.

These steps should help establish a connection.

 

0

0

user_2bffc8

Visitor

 • 

3 Messages

17 hours ago

I have a Davis weather station that is connected via ethernet. The new Xfinity gateway I got is not allowing me to connect to the weather station. I have manually entered the mac address into the gateway, but still no traffic.

I have the weather station's ethernet connected to an xpod which is on line and working. I have also tried connecting the weather station directly to the gateway, still not working.

Looks like the new gateway does not play well with the Davis weather station ethernet.

Any suggestions?

Jon.

0

0

forum icon

New to the Community?

Start Here