U

Visitor

 • 

10 Messages

Tuesday, December 27th, 2022 2:28 PM

Closed

Voice equipment

I have an old eMTA  Arris TM22G for my voice and my own modem and router for Internet, but after trading in my Xfinity gateway I find I still get charged now "15.00" / Month for the ancient eMTA device.

What equipment can I use as a replacement?  I don't want to change my Internet setup.  

Thanks 

This conversation is no longer open for comments or replies and is no longer visible to community members.

Gold Problem Solver

 • 

26.4K Messages

2 years ago

... What equipment can I use as a replacement? ...

If you are asking about equipment available for purchase, see https://www.xfinity.com/support/devices. Select your speed tier (or two or three notches higher to allow for future speed upgrades) and be sure to check the "Voice/Telephone enabled" box.

Please be aware that there are 2 kinds of responses in this Forum: Replies and Comments. When you Comment on a post by scrolling down to "Comment on this post here...", I am notified of your response. But if you select Reply, I am NOT notified and may not be aware of your response.

Visitor

 • 

10 Messages

@BruceW​ Yeah..thanks but I'm not looking for a multiple hundred dollar outlay.

Possibly a Xb7 in bridge mode to connect my phones to?

Gold Problem Solver

 • 

26.4K Messages

2 years ago

... Xb7 in bridge mode ...

Sure, but you'll still be paying the same as you were for the TM822G.

Your question is unclear. What are you trying to do exactly?

Please be aware that there are 2 kinds of responses in this Forum: Replies and Comments. When you Comment on a post by scrolling down to "Comment on this post here...", I am notified of your response. But if you select Reply, I am NOT notified and may not be aware of your response.

Visitor

 • 

10 Messages

@BruceW​ 

Ideally, I'd like to buy something like the existing TM822G (< $50) that I've been paying for, and have it provisioned by Xfinity so I can stop the $15 / month lease for a piece of equipment that has been end of life for several years now.  Since all these and my other charges keep escalating year over year.

Thanks 

Gold Problem Solver

 • 

26.4K Messages

2 years ago

... I'd like to buy something like the existing TM822G (< $50) that I've been paying for, and have it provisioned by Xfinity so I can stop the $15 / month lease ...

So go ahead? The 822 is approved for retail purchase and is still listed on their Device Info page, so what you are proposing should work as long as you're OK with being limited to "Wired Download Speed: Up to 286 Mbps".

And, as I posted above:

... if you select Reply, I am NOT notified and may not be aware of your response.

Visitor

 • 

10 Messages

2 years ago

Thanks Bruce 

Yeah... the 822 is only used for voice. I have a Moto 8611 for data along with a Syno Router where I'm getting a pretty consistent 500 - 600 wirelessly oh their 800 plan. Even plugged into the modem directly I can only go around 700.  

Thanks 

Good to know they will provision "my own" 822 - Gonna pick one up.

Gold Problem Solver

 • 

26.4K Messages

2 years ago

... the 822 is only used for voice. I have a Moto 8611 for data ...

Best to get their blessing first. Two device setups like this used to be common, but Comcast has become cranky about it in recent years. They may or may not decide that you can't do it if you're not paying a rental fee. Good luck!

Please be aware that there are 2 kinds of responses in this Forum: Replies and Comments. When you Comment on a post by scrolling down to "Comment on this post here...", I am notified of your response. But if you select Reply, I am NOT notified and may not be aware of your response.
forum icon

New to the Community?

Start Here