Visitor

 • 

1 Message

11/14/2026 1:53 AM

Ont provisioning

Customer support via phone is not helping. I need my xfinity NKFN11AEL ONT to be provisioned to work with my router. 

Oldest First
Selected Oldest First

Expert

 • 

123.1K Messages

1 day ago

Concern moved here to the Customer Service help section for greater exposure to Comcast corporate employees (The Digital Care Team) for assistance.

Official Employee

 • 

3.1K Messages

1 day ago

Hello, @user_y7n549! I know how frustrating it is when phone support isn't getting you connected, especially with an ONT swap or new setup. Before we dive into backend provisioning, let's make sure a few basic troubleshooting steps have been covered:

 

- Power Cycle: Unplug both your Nokia ONT and your personal router from power for about 60 seconds. Plug the ONT back in first and wait for the status lights to stabilize completely before plugging your router back in.

- Check Physical Connections: Verify that the Ethernet cable is securely plugged into the active data port (typically labeled 10G/LAN or LAN) on the ONT and runs directly to the WAN/Internet port on your router.

- Release/Renew IP: If your router is holding onto an old lease from a previous setup, releasing and renewing the DHCP lease in your router's admin settings can help it pull a fresh public IP.

 

If you've already verified your physical connections and power-cycled the equipment, the ONT likely needs its serial number or MAC address registered/provisioned on our backend system. When you have a moment, please send us a Direct Message with your full name and complete service address, and our Digital Care Team will gladly take a closer look at your account provisioning!

 

How to send us a direct message:  

  1. Click "Sign In" if necessary.  
  2. Click the "Direct Messaging" icon.  
  3. Click the "Start new conversation" (pencil and paper) icon.  
  4. In the "To:" line, type "Xfinity Support".  
  5. As you type, a drop-down list will appear. Select "Xfinity Support" from that list. 
  6. An "Xfinity Support" graphic will replace the "To:" line.  
  7. Type your message in the text area near the bottom of the window.  
  8. Press Enter to send it.  
forum icon

New to the Community?

Start Here