Recently upgraded my modem to Xb8 and purchased two Asus 2.5 moca adapters for rooms I need hardwired. There is a moca filter at the ground block and only 1 splitter in entire system in basement (CSMAPDU9VP power inserter). I have already went into router setting and enabled the built in moca. Route

I'm an Xfinity customer with the supplied Netgear router. I am not using the MoCA functionality internally as I could not get it to work. Please help me with this setup. Outside cable goes to POE filter to splitter (MoCA compatible). From the splitter I have a Motorolla MoCA adaptor setup as prescri

I have the XFi Gateway modem, an Orbi Router (extender), and to Hitron Bonded MoCa 2.5 Adapters. I was getting poor internet signals throughout the house and I have tried everything. Had Eero's in the house (3 of them) and now upgraded to the Orbi. Finally XFinity changed my cable outside of the hou

How do I check if my xfinity router has MoCA enabled? Not able to login to router settings - keeps saying incorrect username/password.

I have three Hitron MoCA adapters. I have MoCA enabled on my Xfinity modem. I can get two of the adapters to hook up and they work perfectly but am unable to get the third connected. If I exchange the one that does not work with one of the others, it then works. Does Xfinity limit the number of MoCA

By default the MOCA is disabled, i enabled moca for just a test & now i cant disable it just keeps turning back on.There has to be a way to disable it.

MoCA adapters with xfi pods….can I use them in order to hardwire my xfi pods for the mesh backhaul, or do the pods have to be plugged in directly to my network? I know they work on WiFi primarily but to maximize the capabilities of the pods I’d like to have them hardwired. Was hoping MoCA adapters w

Hi, I want to set up a wireless access point using MoCA, which I understand is supported by my XB7 Gateway. However, I don't know if the adapter / splitter where the Internet comes in to my home are set up for MoCA because they were painted over when the house was painted. Is it possible to have som

I have an Xfinity Gateway XB8 connected to coax on the first floor. I have coax that used to be used for TV in the basement attached to a splitter with the source coming from coax from a box attached to the back of the house. I also have three Deco X60 models. I want to use the existing coax to crea

Does every xfinity service works with MoCA , or you have to enable it

My setup XB8 with MoCA turned ON Two xFi Pods (Gen 2) Two identical MoCA 2.5 adapters (e.g., two ScreenBeam ECB7250s) Goal Use the XB8’s built-in MoCA so a single MoCA adapter on the far side provides MoCA Backhall to the xFi Pod (no extra gear next to the XB8). What works Ethernet test: Long Ethern

Hi. Any help would be appreciated. I hooked up a bunch of MOCA adapters, everything worked fine on every tv. Ethernet is being used but the TV’s connection is really slow . I changed the modem on to Enable MOCA and then the Connection gets extremely bad and really does not work. I thought switching

I had a technician come to my house and disconnect my personal MOCA equipment and tell me I can't have it connected or else Xfinity will disconnect my service. Is that correct what he told me? Also he told me he never heard of MOCA so that tells me his skill level.

I just wrote a long [Edited: "Language"] post on this and of course the Xfinity website crashed. I’m trying to setup MOCA with my XB10 but it seems to kill speed or internet entirely. Is it possible to set it up with 2 external MOCA nodes using a cable splitter at the primary connected to the gatewa

I'm not particularly network savvy and apologize in advance for the long post. I just want to include as much information as I can. I recently swapped out a XB8-T modem for a new XB8-T suggested by the Xfinity team member at an Xfinity store. He suggested a new modem of the same model may increase m

Comcast recently advised me that I needed to upgrade to their latest gateway. My previously gateway (a 2nd Gen) was whitelisted so that I could use an ActionTec MoCA device to get a wired internet connection in my basement and it worked flawlessly for years. The new equipment arrived yesterday which

I've been going in circles with Motorola's support regarding the MM1000 MoCA Adapter I ordered. It's unclear whether it's going to work with my house's configuration, and so I'm unsure if it's worth the risk of ordering a second one. 1) Point of entry of Comcast cable into house is unclear. Numerous

I have a new xFi router (Arris TG4482A) and had MoCA enabled on that router. Recently MoCA suddenly stopped working and all of my TiVo devices stopped working as well. I have tried enabling MoCA by logging in as admi to my router, going to Connections...MoCA...Enable and saving this configuration, r

I have some cable inlets in my bedrooms, and I'd like to use one to connect my PC to Ethernet instead of wireless, but I don't want cables running from room to room. So, I bought a MoCA adapter and filter. https://a.co/d/1rGmnia and https://a.co/d/0JI6Hfb . My main cable inlet is in the living room.

TL; DR Comcast XB7 (Technicolor CGM4331COM 2.0) cannot simultaneously support xFi Pods (single gigE model) and MOCA (Actiontec ECB6200). The MOCA link drops anywhere from a few seconds to a few minutes and the Pods frequently re-mesh. Unplug either all the Pods or all the MOCA transceivers and all e