You can easily program the Comcast controller to control an Apple TV. However, you must have a free AUX button on your Comcast controller to dedicate to controling the Apple TV. I found this on the internet: https://gist.github.com/carimura/7523120 It is very simple to do - less than 5 minutes - AND it works. The Comcast arrow keys mimic the Apple TV navigation buttons; the Comcast play is Apple play and Comcast menu is Apple menu or back. Here are the instructions in case the website is not available: ##Set Apple TV to Aux Keys -- Press Aux (Device) Button Hold Setup Key until Aux Button Blinks Twice Type in code 31115 (Aux Button will blink twice, if it is a long blink try last three steps again) ##Fix Play and Pause Keys -- Hold Setup Key again until Aux Button Blinks Twice Type in code 994 (Aux Button will blink twice, if it is a long blink try last two steps again) Press (Do Not Hold) Setup Key Type in code 00234 Press Play (Aux Button will blink twice, if it is a long blink try last five steps again) Repeat the immediately above five steps, but replace Play with the Pause Key. (This is unnecessary, as the play and pause key are the same on the Apple TV remote, but some people like the buttons to make sense.) You can copy the Menu key to any other key by doing the following: Hold Setup Key again until Aux Button Blinks Twice Type in code 994 (Aux Button will blink twice, if it is a long blink try last two steps again) Press Menu Key Press Key you with to behave like the Menu Key. (I do it to the Guide, Exit and Last Key)
... View more