I was having frequent (several times a day) problems with DNS Server not responding. My IPV4 was configured to obtain a DNs server dynamically. I did some searching on the internet, and found a recommendation to hard code DNS servers in my IPV4 configuration. The primary and alternate DNS servers that I used are from OpenDNS. They are 184.108.40.206 and 220.127.116.11, respectively. Since I made that change 3 days ago, I have not had any problems with DNS server not responding.
Others with this problem might want to consider this solution.
Solved! Go to Solution.
Was this in a router's config or a computer O/S ?
I'm running Windows7 through a wireless connection. To change the IPV4 configuration to hard code DNS servers I: navagated Network and Sharing Center -> Change Adapter Setting -> Wireless Network Connection -> Properties -> Networking tab -> Internet Protocol Version4 -> Properties -> Use the Following DNS Server Address. Entered the 2 IP addresses.
Does this answer your question?
O/k. Some routers have difficulties performing *proxy / relay DNS* which many do by default. That said, FWIW, in this age of CDN's, streaming video content, gaming, and other services, it is typically better to use the ISP's provided by default DNS servers. Even if their IP's need to be *hardcoded*.
Try hardcoding them in to the router's config if you can. 18.104.22.168 and 22.214.171.124
Thank you for giving me the Comcast DNS server addresses. As I said before, I'm currently using OpenDNS as the DNS servers in my IPV4 configuration. Before switching to the Comcast servers, I tried some ping tests. Pinging of 126.96.36.199 for 10 reps with a 8192 message size and a 10-second timeout period, resulted in about 50% of the pings timing out. Pinging the OpenDNS addresses resulted in no time outs.
The bottom line: I'm sticking with the OpenDNS servers 188.8.131.52 and 184.108.40.206. I have had no DNS failures since I hard coded these addresses over 1 week ago.
That's your choice of course but FWIW, pinging a Comcast DNS server is not a good measure of performance or an accurate troubleshooting tool as these servers are configured to de-prioritize / rate limit ICMP packet based ping probes / requests. This will cause them to show packet loss / slow response times when the are actually performing normally for real traffic / DNS requests.
So what is the solution? I had some previous addresses from Comcast that worked fine until I reconfigured my router and it came up with 220.127.116.11 and its brother 18.104.22.168. I am just not getting satisfactory performance and frequent timeouts just doing normal traffic to the Comcast.Net site.
Since my original posting on this thread on 9/10/12, I am using OpenDNS servers 22.214.171.124 and 126.96.36.199, and have had no DNS issues. You might want to give it a try.
Steve Schaaf - a Comcast Customer