Community Forum

Can't program XR15 with Sharp tv

Highlighted
Frequent Visitor

Can't program XR15 with Sharp tv

I have gone thru all the codez and nothing. The TV is about 2-3 yrs old. So are there other codes to try? Any thoughts?
Highlighted
Silver Problem Solver

Re: Can't program XR15 with Sharp tv

https://www.xfinity.com/support/remotes


I am not a Comcast Employee.
I am just a customer, volunteering my time to help other customers here in the Forums.
Was your question answered? Mark the post as best answer!
Highlighted
Diamond Problem Solver

Re: Can't program XR15 with Sharp tv

Have you tried to manually find a code?

I am a Retired Official Comcast Employee
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Mark a post as the Best Answer!
Highlighted
Frequent Visitor

Re: Can't program XR15 with Sharp tv

I have been trying to finb codes elsewhere but not yet found any. Any suggestions to where?

Highlighted
Silver Problem Solver

Re: Can't program XR15 with Sharp tv


@6863537 wrote:

I have been trying to finb codes elsewhere but not yet found any. Any suggestions to where?


Did you try my link?

\https://www.xfinity.com/support/remotes

 


I am not a Comcast Employee.
I am just a customer, volunteering my time to help other customers here in the Forums.
Was your question answered? Mark the post as best answer!
Highlighted
Frequent Visitor

Re: Can't program XR15 with Sharp tv

Yes, I have tried all the XR15 codes. i think i might try the other remotes like the XR11 remote codes to see. I have just drilled down to the Sharp tv so will give them a shot as well.

I also dont have Voice Command working so this XR15 is a bust for me so far.

Highlighted
Diamond Problem Solver

Re: Can't program XR15 with Sharp tv

For voice commands did you input the given 3 digit code?

To find codes not listed, press A and D, 991 and ch up until the tv turns off

You can also pick an XR11 remote anytime at your local service center

I am a Retired Official Comcast Employee
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Mark a post as the Best Answer!
Highlighted
Frequent Visitor

Re: Can't program XR15 with Sharp tv

will the XR11 remote work with this new X1 dvr? If so and i cant get this new remote to work, will go that route.

thx

Highlighted
Silver Problem Solver

Re: Can't program XR15 with Sharp tv


@6863537 wrote:

will the XR11 remote work with this new X1 dvr? If so and i cant get this new remote to work, will go that route.

thx


I use my XR11 with my X1V4 DVR.


I am not a Comcast Employee.
I am just a customer, volunteering my time to help other customers here in the Forums.
Was your question answered? Mark the post as best answer!
Highlighted
Frequent Visitor

Re: Can't program XR15 with Sharp tv

Thanks.

I have tried my XR11 remote with the new X1 dvr and no go. So 2 different remotes and no sync. So could it be the new DVR?

I originally had problems getting this bugger set up even tho it should have been just a plug and play but no go.

Highlighted
Silver Problem Solver

Re: Can't program XR15 with Sharp tv

Press A and D, press 992 and channel up until your receiver turns off


I am not a Comcast Employee.
I am just a customer, volunteering my time to help other customers here in the Forums.
Was your question answered? Mark the post as best answer!
Highlighted
Frequent Visitor

Re: Can't program XR15 with Sharp tv

how many times? I went about 25 times and no change.

 

Highlighted
Diamond Problem Solver

Re: Can't program XR15 with Sharp tv

If you went that much, and you did it properly, there’s no compatible code. Odd for a Sharp but it happens. The DVR has nothing to do with setting up your codes.

I am a Retired Official Comcast Employee
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Mark a post as the Best Answer!
Highlighted
Expert

Re: Can't program XR15 with Sharp tv


@6863537 wrote:

Thanks.

I have tried my XR11 remote with the new X1 dvr and no go. So 2 different remotes and no sync. So could it be the new DVR?

I originally had problems getting this bugger set up even tho it should have been just a plug and play but no go.


does your sharp TV remote control the TV via IR (dark window on the end of the remote that points toward the TV-test by covering end of remote with palm of hand and press volume or power button)? or by RF (non IR - similar to how the X1 remote talks to the paired X1 set top boxes)?



I am not a Comcast Employee.
I am a Customer Expert volunteering my time to help other customers here in the Forums.
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Mark the post as Best Answer!
Highlighted
Frequent Visitor

Re: Can't program XR15 with Sharp tv

well thanks. I thought since this was a fairly new tv, 2-3 yrs old, there must be something i am doing wrong.

Now have to deal with 2 remotes to watch tv. not optimum.

 

Highlighted
New Poster

Re: Can't program XR15 with Sharp tv

Sharp TV's are made in China by HISENSE. I have a Sharp and used the codes for HISENSE. Try these codes: 

12183
10748
11758

Highlighted
New Poster

Re: Can't program XR15 with Sharp tv

This worked!!!  Thank you so much, i've been looking everywhere for that code.


@DDAUGHERTY1 wrote:

Sharp TV's are made in China by HISENSE. I have a Sharp and used the codes for HISENSE. Try these codes: 

12183
10748
11758


 

Highlighted
Frequent Visitor

Re: Can't program XR15 with Sharp tv

That worked. Great and thanks.

Code 12183 worked.

dwebb

Highlighted
New Poster

Re: Can't program XR15 with Sharp tv

Thank you! this helped me as well I have a 43k325uw Sharp and 11758 worked for me

New Poster

Re: Can't program XR15 with Sharp tv

The ONLY code that worked for my sharp tv after going through all codes is 11564
Highlighted
New Poster

Re: Can't program XR15 with Sharp tv

you are a lifesaver!! I've been dealing with this issue for 2 months. This finally worked. Thank you so much @DDAUGHERTY1