Community Forum

set-up for sound bar

Xfinity Forum Archive
About the archive project

Xfinity Forum Archive...

This is an archived section of the community.

Content in this area has been identified as outdated or irrelevant.

This change was done in an effort to make the forum easier to use and to keep only the most helpful and recent content active.

Post your questions in the Xfinity Community

New Poster

set-up for sound bar

I have been unable to use the AUX on the Infinity custom 3 device remote with the Red select button for a Yamaha YAS-107 sound bar. The remote will power down the SB but does not power it up or control the volume. I have tried device codes 30176, 31176 and 30354.

 

Currently the LG TV is connected to the Infinity RNG110 cable box with a HDMI cable. The TV and SB are connected with HDMI and optical cable. I have tried the optical cable between the SB and the TV and also between the SB and the Infinity box, reprogramming the remote for each set-up.

Do you have any suggestions on getting the remote to control the SB power and volume control?

Yamaha YAS-107 SB has connections for one each HDMI In and Out (ARC), and one optical digital connection.

 

LG 42LH40 TV has 4 HDMI In, one optical digital out, a number of analog connections and one USB In port.

Expert

Re: set-up for sound bar

If the soundbar is connected using the HDMI (ARC) port, did you remember to go through the ARC setup and turn on the function?