Community Forum

self install

Xfinity Forum Archive
About the archive project

Xfinity Forum Archive...

This is an archived section of the community.

Content in this area has been identified as outdated or irrelevant.

This change was done in an effort to make the forum easier to use and to keep only the most helpful and recent content active.

Post your questions in the Xfinity Community

New Poster

self install

one moment please S0a00
Expert

Re: self install


jillcharles2000 wrote:
one moment please S0a00

You will need to call into Comcast at 1-800-266-2278 or 1-800-934-6489 and speak with a CSR about this issue.  Your service may not be connected to your residence.....   



I am not a Comcast Employee.
I am a Customer Expert volunteering my time to help other customers here in the Forums.
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Mark the post as Best Answer!
Gold Problem Solver

Re: self install

"One Moment Please, Available Shortly, Ref code S0a00" and similar messages are generated by the cable box when the signal for the channel you are trying to watch is too weak or has too much noise. This might be because of a bad box or a problem at Comcast (check https://customer.xfinity.com/, 1-800-Comcast voice response, or the "My Account" app) but is most likely due to a poor connection between the box and Comcast's network.

Troubleshoot by checking all connectors and looking for damaged coax cable. Running the cable through a surge protector, a defective splitter, or too many splitters can cause signal problems as well. If there is an amplifier in the line make sure it's getting power. You might also try unplugging the cable box/DVR/digital adapter power cord for a minute or so.

If you can't find the problem, call them at the phone number on your bill or 1-800-Comcast, or chat with them using one of the "Trouble" options at https://www.comcastsupport.com/chatentry/. Ask them to check the account setup and send a refresh signal to the box. If they can't fix the problem remotely, insist they send a tech out to identify the cause and correct it.

If the tech finds bad coax, splitters, amplifiers, or connections in your home (even if Comcast originally supplied them) you'll probably have to pay for the visit unless you have or sign up for their Service Protection Plan (https://www.xfinity.com/support/account/service-protection-plan/, about $6/mo) and keep it for at least 60 days. If the trouble is due to a faulty Comcast cable box/DVR/digital adapter or anything outside your home, you shouldn't be charged.

For additional information please see Pixelation, video and audio dropouts, One Moment Please S0a00 messages.