Community Forum

Program XR11 remote for 30 second jump

Xfinity Forum Archive
About the archive project

Xfinity Forum Archive...

This is an archived section of the community.

Content in this area has been identified as outdated or irrelevant.

This change was done in an effort to make the forum easier to use and to keep only the most helpful and recent content active.

Post your questions in the Xfinity Community

Frequent Visitor

Re: Program XR11 remote for 30 second jump

 I've found that lately when programming 30 sec advance, after hitting exit 3 times, then 0030, then exit again, it's necessary to push the blue power button on the box off, then on again for the programming to take. I say do it at the box because my XR-11 won't power anything off. (Get red light on remote instead of green, could be due to mine having power saving setting set to off in device settings.)

Gold Problem Solver

Re: Program XR11 remote for 30 second jump

Unplug and reboot your X1 box.
New Poster

Program XR11 remote for 30 second jump

I've had the 30-second skip set on my boxes for 1.5 years. I come home tonight and now it doesn't work. The EXIT EXIT EXIT 0030 no longer works.


1) Why did this stop working in the first place?? (rhetorical question)


2) How can I reprogram my boxes with the XR11 remote to re-enable the 30-second jump?


5 minutes jump is absurd. Please help. Thanks.