Xfinity Forum Archive...
This is an archived section of the community.
Content in this area has been identified as outdated or irrelevant.
This change was done in an effort to make the forum easier to use and to keep only the most helpful and recent content active.
Post your questions in the Xfinity Community
I had the same issue with error 14. This is what I did to resolve the issue.
1. unplug the cable box.
2. If you have a splitter in line, take it out and connect directly to the back of the cable box from the cable coming into your house.
3. Plug cable box back in and let it reinitialize everything.
If you are now able to get xfinity on demand, the problem is the splitter. I verified I could get on demand without the splitter. Once I verified that, I powered the cable box back off and I installed a new splitter from comcast with 3.5 dB loss on the splitter output ports. I powered the cable box back up and the problem was solved. Either my old splitter was going bad, or it was out of band at the high end. Either way my error 14 problem is solved. Give this a shot. I hope it helps you and other people out with this problem.
Are you getting error-14? If so you may want to check your inside cable for loose splitters, or loose connections. That error usually means the box cannot communicate with the head end. Since you reflect that this is intermittent, it could just be something is loose or not seated well.
We recently had a recurring problem with our internet dropping out and then recycling itself back in over and over again. The technician came out and ran his tests. He said the only thing that showed up was that one of our TV's had a loose connection which would put noise in the line so he tightened everything up and the internet started working again. (Can't wait to see that bill.) Anyway, that evening we noticed that On Demand was no longer working (Error 14). Repeated attempts by the customer service people to restore the service over the phone were unsuccessful. We now have an appointment scheduled for another technician to come out and see what he/she can screw up. If things are not working after that visit we will be switching to another provider.
I had the error 14 no on demand as well. After surfing the message boards one of the things that I kept seeing was bad signal due to coax cable or splitter. I discovered that I was indeed using a splitter, one cable going to box one going to television. I disconnected the splitter and ran one cable directly to box. Problem fixed., on demand came right up no problem. I threw the splitter in the trash
This error started popping up recently - no On Demand available.
Customer Service said they beleive it to be a construction issue, however the rest (internet and non demand TV) is fine.
Just had comcast installed today and yes.... error 14 on demand.
1. Unscrew the metal cover on the back of the HD box.
2. Pull out the cisco card
3. Insert it again
4. Re-start your hd box by unplugging it for 30sec
Enjoy on-demand service
This problem has been ongoing. Talked with Comcast three times today plus a supervisor. Also tried automated system. I see by the forum that is issue is consumer wide.
Usually this is caused by a lack of communication between the box and the head end. This can usually be solved by unplugging the power from the box for a full minute and plugging it back in. If that doesn't work call comcast it also can be cause by not having the on demand codes added to your account.