Xfinity Forum Archive...
This is an archived section of the community.
Content in this area has been identified as outdated or irrelevant.
This change was done in an effort to make the forum easier to use and to keep only the most helpful and recent content active.
Post your questions in the Xfinity Community
Solved! Go to Solution.
I have an older mitsubishi projection tv with component input...but no hdmi. Comcast tech got a pace v2 box for X1 with both hdmi and component video....connected box to monitor via component but only get moving noise lines on the monitor and no sound as well. My monitor has and does handle component well with a standard dvd player both with image and sound using the component color cables and audio jacks....the pace v2 is working...tested it on a separate digital monitor with component color input. Pace v2 does output via its RCA yellow video and red/white audio on this Mitsubishi monitor inputs giving it just yellow cable video and red/white audioinput ...get all dvi features ....good color...good audio but at a lower non component resolution. Smart Comcast tech on site...but we couldn't figure out why. Not getting signal via the component ...just noise on the monitor with no sound..he tried setting the signal to 720 from 1080 etc on his end but still a no go. The older Mitsubishi is housed in custom made cabinetry with fit to size faceplate...don't want to do a major rebuild on my cabinetry for a current hdmi smart tv just yet.....any ideas. Have another Sony HD hdmi monitor in another part of the house...of course works great with the current Arris hdmi only outputs...1080 with all the X1 features. Thoughts to push the res to dvd quality on this legacy system...using the advised pace v2 box.
only xg1v1 DVR and rng150 companion have component. the yellow is composite video on the v2 you have and the red/white are stereo out.