Xfinity Forum Archive...
This is an archived section of the community.
Content in this area has been identified as outdated or irrelevant.
This change was done in an effort to make the forum easier to use and to keep only the most helpful and recent content active.
Post your questions in the Xfinity Community
FYI, from another board (dslreports.com). Firmware version 22.35 was released (apparently in Aug or earlier) for the DCX's to address the known HDMI-related issues, especially when used with repeater devices such as av receivers. Someone else reported having Firmware version 22.37 with a release date of Aug 12 on his boxes, don't know what specific issues were addressed in 22.37 vs 22.35. Anyway, all of those users are reporting no HDMI problems with their boxes. So anyone looking to specifically get one of those DCX's from Comcast for use with an av receiver via HDMI might also want to find out what the firmware version is, and if it's lower than 22.35 be prepared to use component connects until the newer firmware gets pushed down...
I haven't got the DCX3400 yet, as I have some recorded shows still to watch on the DCH3416.
What default firmware version is on the DCX3400, and has anyone been able to get the upgrade pushed from Comcast to 22.35 or 22.37?
How do you get Comcast to push out a new firmware to my DVR's?
Or is getting a replacement unit the only way to get DVR's with updated firmware?
Seems like the closest board matching my problem. My box worked fine for almost a year and then a few weeks ago it gradually degraded, some channels worked, other didn't, I'd get an S0a00 error. I've called tech support several times and it lead me to get a new box (DCX3400), brought it home, hooked it up and got no HDMI signal, No Component signal, but I can get a Composite signal.
I tried changing the settings on the "power off then press menu" screen, but I can't uncheck any boxes, they are greyed out.
Comcast has sent several "reset" signals, which haven't done a thing. I run my XBOX 360 through an HDMI and it works fine, it has to be the box as my TV has no problems with any other device.
I really would like to get this fixed otherwise I'm just going to cancel my service, why pay for something I can't even see?
I'm at a loss and have tried everything tech support has suggested other than PAYING for a tech to come out to fix it.
You may need to have the box replaced. If the box is faulty then you wouldn't have to pay for the visit.
Your original problem could be caused by a weak signal, which can affect only certain channels. Check the connections to the cable box, especially the incoming coax, and eliminate any unnecessary splitters.
To check signal strength with a Motorola box, tune to the offending channel, turn off the box with the remote, then within two seconds hit "OK/Select." This will bring up the diagnostics screen. Select "Inband Status" (probably page d04) and look for "SNR" for the tuner(s). This value should be in the mid to upper 30s. You may be able to improve the signal strength by adding a signal amplifier to the incoming cable line.
I've already had the box replaced with a brand new one, just yesterday. Also, I can't view any diagnostic screens because there is no video coming out of the box to my tv, it knows there is a connection because it flashes "DVI" when I turn the TV and my TV knows that it's connected because it changes from "no signal input" to just "no signal".
Also, the signal strength should be good, when the tech came out a few months ago to do some line work he told me I have one of the best connections he's seen.
I don't have a splitter, it goes right to the cable box. I wonder if length can be an issue, the coax running to my tv is about 35-40 feet long. I'll check it when I get home, it's just weird that i get a yellow cord video signal, but hdmi and component don't work.
Things I've tried for fixing this:
Changing power outlets
Changing power strip (it's grounded)
Changing the Cable Box
Changing the HDMI cords
Trying the HDMI in the 3 other ports on my TV
Trying two other HDMI cords - Didn't work
Tried Component connection - Didn't work
Tried Composite connection - Worked, but useless it I'm paying for HD service.
Had the "reset" signal set twice and waited the 45 mins before even touching the box.
Changing the format on the front of the box from 480i, but it's locked on that format.
Can't change anything on the diagnosis/setup menu as it's all greyed out except for "16:9 / 4:3" and the closed caption settings.
Power Cycled, several times.
Checked all the connections, unplugged, plugged them in, etc.
Anyway, I guess I'll just have to have a tech come out, thanks for the info though.
I am thinking that are two issues. First being you are having signal issues coming into the TV outlet.
Second, that signal issue is preventing the new box from fully activating properly. When they stage the boxes in the warehouse, they end up with some basic tier programming to get it going. Once you bring the box home, and you call in to activate it to your account, then the box fully activates to your programming tier. In your case the box can't get the OOB signals to receive the activation signals, so nothing happens.
You need a tech out to correct your signal issues, and then he can get the box fully activated.
The fact that your were having S0A00 messages says you are now having some signal issue that only a Comcast tech can correct.
Finally, an answer that makes sense and doesn't like it came from a book and was copied and pasted.
Sincerely, thank you! I'll get a hold of tech support again.
Also, I'm coming to these forums from now on, I feel like I actually got somewhere. Thanks again!!
If you get any runaround from phone support, come back and we will get in touch with people that will get things fixed. You have been thru enough already.
I think I'm issuing the same thing. My dvd keeps radomly cutting off and then displaying the dvi message. It happens every so many minutes and we are connected with the HDMI cable.
They said they can't get anyone out until next week to check it. Anyway to get someone out sooner? I've been without cable for two weeks now...thank goodness for Netflix and the internet.
Let me know, if you can't I'll just make an appointment for next week.
Hey Ekhoffs - can you share the telephone number on your account via email? I'll have a friend look into this. Please be sure to reference the post here
I got someone coming out tomorrow morning...after a 50 min chat conversation, copying and pasting the things I've tried a few times. The tech's name was "Dimples"...I couldn't help buy laugh.
Anyway, I'll head back here if I don't have any luck, thanks again gang.
So I finally got a tech to come out and all he did was connect the cable directly to my tv and told me to keep in turned to Channel 4. This is no where near the resolution I wanted.
I'm calling dish network and getting quotes, this is beyond ridiculous, why did I have service before and now all of a sudden all I get are crappy non-hd channels that I can only get through a coax connected to my TV? Does no one at Comcast Support talk to each other or read notes?
I'm going to email: Detreon_Roberts@comcast.com and see if anything can be done and if not, i'm done with comcast cable, almost 3 weeks with no service and i already know im' going to be charged for that visit today, because you guys are a-holes and i'm going to have to pay for the 3 weeks of service because no one gives a flying F, they just send some tech that can't speak the same language as me to plug in a wire i could have done myself.
Dete has already been notified, so he will be in contact when he gets back in the office. Please share anything you have to share with him on your email.
I sure don't know what is wrong with those guys, and I am truely sad on what you have gone through.
So, all along the issue was that I was getting HD Channels because I was given an HD box when my service was installed and Comcast was including the channels for free. As of a few weeks ago this was not the case.
So pretty much my HD channels were turned off without notification...that's all it was. Why couldn't someone just have told me that from the beginning?
Anyway, I'm all set now thanks to a great phone rep named Gabriel, I talked to her supervisor when we were done to let her know what a great job she did.
Thanks again for your guys' help and sorry for the rants.
Hi there - glad to hear all is well. Can you let us know if the other issues were fixed too? (Take a look at Jay's post)
It is hooked up to my TV with an HDMI and most of the channels work ok.
Still, my local channels are scrambling or not coming in at all, still getting the S0a00 "channel available shortly" message.
If your still getting that message, you are still having some signal issues at your set top box.
I lost track if a tech ever came out or not. If he did, then he needs to get back, if no one has been out, then a tech needs to come out and find where the signal issues are and fix them.
You can either call to Comcast for a tech appt, or Dete will be back on Monday, and he can contact the local people to send someone out.