01-04-2015 02:02 PM
I keep getting a error code : 13001 every time I fire up the xfinity tv app. I'm in South San Francisco CA. Please help.
What devices are you using? Did you try using the online site, xtv.comcast.net?
with xFinity TV Remote App suddenly today there is nothing shown on DVR manager pages for scheduled nor priority manager. This program recently was updated and has worked perfectly. Now scheduled and priority display as if nothing is scheduled at all. I loaded the app on my iPhone and iPad same issue on both. Please advice comcast.
It's currently not available in Tallahassee (use of the xfinity tv app).
I'm in shreveport, La. on web dvr manager for scheduled programs i get this
Sorry, a system error has occurred and your list could not be loaded at this time. Please try again later.
and the web app that uses same info is down too.
any way to open a ticket on this?
NSEARL errors healed app worked a week loved it!!! Now getting error 1000385 please help, disabled and watching app helps pass the time. Thank you in advance
This is a known issue and we are working on a fix.
simple test: on your cell using safari go to http://www.whatismyip.com/ don't the the http part there. click on that link for your 'laptop'.
noting those number compare to the number on your (or a) DVR by long press 5+ seconds on the "exit" button, "down" "down" "2"
When menu comes up hit "down" to system, then "right" to page 6 (of 9). Assuming your phone is on wifi, and computer is wifi or ethernet connected to the router, the first 3 numbers of the ip address should all match.
example: 184.108.40.206 220.127.116.11 and 18.104.22.168
the 'dotted quad' (set of 4 Internet protocol address number) first 3 numbers all match. This is first 'check', 2nd check is 'ping' (to computer geeks, latency). This is also checked per DRM to be under 7ms or so to be sure the "IP" access is not used via a VPN (remote access like someone using your network but they are in another city/state/country).
Let us know what numbers you see. prob should not post full numbers here but just change first number for example to 999 etc for showing the number pattern
I'm having the same trouble getting the XFinity iOS TV app working as others. Rollout of X1 equipment and service began in the Culpeper, VA area last September and we had our STBs swapped out in December. The new service is very nice in the home, but when I log into the iOS TV app (or onto the xtv.comcast.net web site) I receive the message "XFinity TV is now available in your area. Please call 1-800-COMCAST." My account is already set for XFinity service. What else is necessary to get streaming-to-device and download-to-device working?
call the 877-896-8678 number and ask them if cloud dvr is on your account and if not is it eligible to be turned on (available). approximately 50% now have it in their area.
Your advice was on the mark; my account lacked the "X1" code. Apparently the technician installation last month didn't include adding that code to the account as I'd expect. Bit of a disconnect there.
Worth noting for others in the same boat: don't select "cable tv" at the main menu after calling 877-XFINITY, select "high speed internet." The problem is tv-related, but streaming and downloading from the cloud are housed in their internet division. After re-assuring that service rep three times that we had a technician install X1 boxes last month he checked my account, saw that they still showed the old HD dvr and non-dvr boxes on the account, and transferred me to their "change of service representative" with the advice to tell them to add the X1 code. That rep did so, though it took her about ten minutes to navigate her software interface. And she sounded like she knew what she was doing, so maybe Comcast needs to make their internal interfaces easier to use.
Anyway, after she set the codes my DVR popped a message or three on the tv screen, I accepted terms both there and on my iPad, and now I'm playing with the app. This stuff is pretty cool.
lucky dog, you! not avail here yet
I'm a little slack-jawed at the whole thing. I'm streaming live tv on my iPhone while I watch the same on my tv. The stream is about thirty seconds behind live. I'm just stunned that when they get all the pieces set correctly, it works. I even test-recorded a thorty-minute show, downloaded it to an iPad, watched it, returned it to the DVR and watched it there. And it worked as advertised. Well done.
I'm also having this problem. I got the X1 box several months ago and had been using the apps on my iPad and iPhone without any issues. Two weeks ago I added Home Security (so I'm now quadruple play). Two days ago I received an email summarizing my account servies with the addition of Home Security. Coincidentally (or not) the following day when I opened the Xfinity TV app to set a new recording I was asked for my log in information and after "Adding device" came on I got the Good news! page and subsequently a 13001 error. I spent an hour on the phone with Xfinity customer service this afternoon and the app is still not working.
So I'm now waiting for a "Tier 2" customer service agent to call me back within the next 24-72 hours (business hours). I'm kicking myself for getting Home Security which was only partially installed properly, so I spent another hour today on the phone with yet another Xfinity customer service agent setting up an appointment for a technician to come and troubleshoot the zones that can't be closed, this after the first installer set up an appointment last week for his one of his more experienced colleagues to come back but never showed up.
I've been an Xfinity/Comcast/@Home customer for over 20 years. I'm on the verge of pulling the plug, getting FiOS like most of my neighbors and going back to to ADT!
I empathize.This stuff should just work.
The short version of how I got this fixed is that they left out the X1 code in my billing profile when upgrading me to the X1 platform. Once I explained the problem twice to a first-level service rep, she passed me on to a service rep who handles app problems, who looked up my account and found the code missing. She instructed me to tell the next rep I spoke with that I needed the X1 code added to my account, and transferred me again. I explained this to the next fellow, who set the code and voila, the apps worked within minutes.
As a seventeen-year happy DirecTV customer I have to admit, it's a pretty sweet setup once it works for you.
I suspect the X1 code was inadvertently removed from your account when they added Home Security to it. You might ask about that code if the second-level tech sounds befuddled.
Also of note, when he added the X1 code the tech helpfully added another $49.99 X1 upgrade fee, which I had just paid the previous month. Yeah, got that removed right after I received my next bill.
You'd think this would all just work together, but it appears the moving pieces are only connected by separarte service reps and techs. They need a better, more integrated software back end to take the humans out of the loop.
I get this exact same message.
XFINITY TV is now available in your area. Please call 1-800-COMCAST to order.
The app was working PERFECTLY for months. I made the mistake of chatting online with a tech about another problem - and whatever he did caused the app to stop working. (and didn't fix my other problem either!) I have called Comcast and been referred to their "App Department". No one seems to have a clue as to what the problem is and what to do about it. I have deleted and reinstalled the app, turned off and restarted Wifi many times with no success - just the message. I am at my wit's end.
I get this exact same message.
XFINITY TV is now available in your area. Please call 1-800-COMCAST to order.
- Stream live TV and On Demand content to any TV, mobile device, or computer in your home.
- Add the X1 DVR and enjoy the convenience of watching DVR recordings at home on your mobile devices and computers.
- Download recordings to a mobile device then take your shows on the road to watch whenever, wherever you like.
Switch AccountDid you recently upgrade to the X1 Operating System? Activation can take up to 24 hours from the time of purchase. Try Again
If you think there's a problem with your service, please call 1-800-COMCAST
call the X1 support center at 877-896-8678. Ask them to check the codes on your account to be sure cloud DVR is on the account. They can not add it if the software 'says' it is not available in your area.
Thank you for your suggestion. I called and they said that the Cloud is on my account and that the codes are correct. They had no idea why the app wouldn't work and once again referred me to the "App Department". After waiting on hold for 20 minutes I gave up and hung up. THis is mystifying as the app worked perfectly for several months.
if you have a laptop or desktop pc see if https://xtv.comcast.net/ works won't work on my chrome but does work with firefox and IE. (well i get the 'not available in your area yet' message).
So I spent 45 minutes on the phone with a customer service rep this morning who seemed knowledgeable and was able to get the app working on my iPhone and I subsequently was able to get it running on my iPad mini, but I'm still getting the 13001 error when I try to log in on my iPad Air which ironically is the device that I had successfully used with the app in the past and the one I really care about it working on. He transferred me to the app department where the rep there wasn't especially helpful not to mention I could barely understand her she spoke so fast. I think she indicated the problem was above her pay grade so she created a work order and someone will get back to me (we'll see). So one step forward, two back.
can you try your iPAD air device again?
Hi all - I just got comcast with X1/DVR and I have yet to get the xfinity tv app to work on my phone, iPad or PC... I made three calls to support with answers that the service was down, that I needed a DVR with cloud capabilities , and landed on a supervisor that said the app was just down altogether. Has there been an outage that is in effect? Four days seems like a long outage timeframe ... Pete
There is no outage, your area has not launched cloud dvr yet... Im guessing your getting the coverage is limited meessage when you log in? http://customer.comcast.com/help-and-support/xfinity-apps/xtv-app-errorcode-coverage-is-still-limite...
ComcastChad, when I log in, I see 0 for everything (TV Go Downloads, Streams, DVR Downloads, and Home... Should these be populated as a new customer?
Got it... thanks, I literally went around in circles for an hour yesterday talking with people who were confused. Eventually had a supervisor on a conference call with the billing department, who finally told me I had the proper DVR (and didn't need to exchange it for a cloud DVR as another CSR mentioned), didn't have to buy an extra 'cloud' package as another had mentioned, and after a couple more dropped calls after being on hold, they were pretty sure the app was down for a few days and was going to email me when it was available again, that I should indeed receive the Xfinity TV app service (I specifically mentioned it wasn't the XFinity To Go app, as that one streams fine with live channels and on demand).
I receive a message saying "Error 13003" and to call in sometimes, other times it just says 'coverage is limited'...
Sorry that was not meant for you... But once you start downloading the apps and using them your devices will start to populate.
Again. the TV app is not available in your area and wont be for some time. When you log into the TV app do you see the coverage is limited message?
Apparently is was a problem with the way my account was showing to representatives. Comcast Chad fixed the problem in a very short time. Comcast Chad is amazing - after multiple frustrating calls - all it took was for engineering to refresh my account - app is working perfectly again! THANK YOU Comcast Chad.
It always seems to come down to finding that one person who has the knowledge and reach to resolve a problem. All else is frustration. Glad you're back in business.
I am on with phone agent now. He has no idea what I am saying or talking about, but having the same issue with X1 App not recognizing my account. Can you help me please?
I had the X1 App on a Samsung tablet and an iPhone. Both worked fine. Over the last few weeks they both stopped working. After I sign in to the app I get the message that the service is available in my area and I should call Comcast if I think there is a problem. I called and they checked my account and said everything looked fine as far as the code needed to use the app. It still will not work. I have tried uninstalling and reinstalling on both devices, and also disconnecting and reconnecting to the WIFI. Nothing worked and the support team was unable to solve it.
There was a code missing from your account, i have added it and you should be good now. Please login to the XFINITY TV app and let me know if your still having issues.
Please send me a private message with your account info... I am unable to find your account with the email address you used to sign up for the forums.
I have the same problem, cannot connect using my iphone to Xfinity TV app. Went through 3 differrnt numbers, 6 support folks tonight -- this cant be that difficult. Help
I had the X1 system installed today. Everything is working great except for the tv app. I can't schedule recordings or see what is scheduled.
Your account is set up correctly, can you try logging out and logging back in to the app and then try to schedule a a hot-recording (set a recording for a program airing now)
I received an update on my OS for my Tablet. My tablet Is called the Samsung Galaxy Tab S. The update is Lollipop 5.0.2. Since the update... the app Crashes. It won't even let me get in the app. I rely heavily on my recordings & downloads from the cloud services. Can someone send this to escalations so it can be rectified. Thank you Chad or whomever can get the ball rolling.