Xfinity plant
Community Forum
Xfinity globe

Phone outage, but reboot eMTA fixed it.

Xfinity Forum Archive
About the archive project

Xfinity Forum Archive...

This is an archived section of the community.

Content in this area has been identified as outdated or irrelevant.

This change was done in an effort to make the forum easier to use and to keep only the most helpful and recent content active.

Post your questions in the Xfinity Community

Valued Contributor

Phone outage, but reboot eMTA fixed it.

Came home from the IMAX theater to the phone not working.  Fast Busy signal.

 

In the Arris tm702g logs, I noticed:

3/14/2010 0:1365530Call Agent Loss of Communications

 

 

Although the Internet worked fine and the signal levels were ok.

 

I reset the EMTA with a ballpoint pen in the recessed button on the back.  Upon bootup everything was back to normal.

 

Just wanted to say if you have issues with Voice, try rebooting the eMTA.  Normally it reconnects by itself after an outage, but in this case a manual intervention was required.

 

ystem:ARRIS DOCSIS 3.0 / PacketCable 1.5 Touchstone Telephony Modem
HW_REV: 7
VENDOR: Arris Interactive, L.L.C.
BOOTR: 1.2.0.12
SW_REV: 7.0.77
MODEL: TM702G

 

Expert
Moved:

Re: Phone outage, but reboot eMTA fixed it.