Worked with comcast support over an hour ago and TV still shows ref Code: S0900 and the other TVs with the adapters all are blinking green with no picture
Solved! Go to Solution.
sounds like signal issues. Check all connectors and make sure that they are finger tight with no wiggle. Remove any unneccsary splitters from the lines. To check snr on a dta hold the info button down until you get the diagnostic screen, hit channel down and there is a snr there. On the moto box power off the box and immediately hit the ok select button. Should have an oob status and numbers on that as well.
That code is a one moment please message, it's almost 99% referring to a signal strength issue
I'd say call them back. What did they do for an hour that it's still broken?
Was it working before, or is this a new self install?
Ok the TVs with adapters are now working. It was a signal strngth issue. My amplifier was unplugged! DOH
However, the TV with the digital box is still saying S0900 even aftre I unplugged it for a minute
talking with tech support now
Looks like the digital box may have gone south. All other TVs are working except the one with the box.So I'll swap it out next week. Thanks for the help guys