I've pressed SETUP and waited for LED to go from red to green and tried the following codes to program my XR2 remote to work with my SLD50A45RQ RCA 50" TV with no luck.
Does anyone know the code for this model TV with the XR2 remote control?
I've tried: 11447, 10018, 11547, 11347, 11781, 11247, 11147, 10747, 10029, 10019, 11922, 10774, 10679, 11959, 11958, 11953, 11948, 11661, 12002, 11911, 11868, 11385, 10278, 10093, 10038, 11919, 11907, 11670, 11047, 10254, 10090, 10051, 10765, 10178, 10835, 10451, 11641, 11602, 10000
A Comcast installer also tried to get the remote to work with the TV without success. I'm not sure if he used the above codes as I wasn't there when he performed the install.
The remote that came with the TV works fine.
I have this same model TV installed at other locations and it works fine with DirecTV and Charter remotes :-(
Solved! Go to Solution.
Hi BAD311, I would be happy to assist you with programming your remote. Please click on this link https://www.xfinity.com/support/remotes/ to walk you through how to pair the remote to your TV, you can also refer to this link https://www.xfinity.com/x1clouduser#overlay-remote to understand how to use your remote as well as learning some tips and tricks to enhance your experience.
I followed the youtube video posted here and it worked in literally 15 seconds WITHOUT entering a code. If you cannot go to Youtube right now follow these steps below:
1) TV can be on or off
2) Press and hold the SETUP key on the X1 remote until the light turns green
3) Enter the code 991 and press SETUP
4) Point X1 remote at the TV and press and release the CHANNEL UP button until the TV turns off or on
5) Press and release the SETUP button