I just purchased a new 40"LCD TV and then upgraded my service with another HD box and the TV and HD channels work great. However, the TV codes provided by Comcast for this TV doesn't work. I tried : 10885, 10889, 10890, 11282, 11577, 11100, 10080, 10111, 11548. The TV model # is VR-4085DF. I went onto the Westinghouse website and they do have a list of codes for COMCAST remotes but the codes are only four digits. This remote takes 5 digits. I tried a leading putting a "0" first and then the code but that didn't work either. I contacted Westinghouse about this but haven't heard back yet. This is very frustrating.
Also, the first code I tried; 10885 does chage the source of the signal on the TV when I press the volume button on the remote. So, it is sending a code to the TV but it is not working right.
Does anyone else have the same problem?
Does anyone know the correct code for this TV using the Comcast remote ?
Try 10000(0000 from the Westinghouse site),didn't notice that in your list
Also try 10463 or 10623 (White Westinghouse from the manual)
You can always try the search feature which takes a bit of time, but will find any code for any TV.
The directions for comcast remotes is below:
Try the above page and make sure you pick the right remote, they each have different remote codes.
Hope this helps.
Thanks to all for your responses. I have tried other codes and they do not work; 10451, 10000, 10623, 11661, 10463, 10661. Also, I tried the 991 code and only found a code that changes the TV source.
I also received a reply from Westinghouse which is not encouraging. They said:
We are contacting you regarding your recent request for assistance from our Customer Relations department, regarding your case.
We apologize for any inconvenience that this matter may have caused you. As a valued customer it is always our best intention to provide you with the best customer service possible. We are currently, dilligently working with the various service providers to get the remote codes that offer full functionality with the serivce providers Hardware (remote). As soon as the codes are available they wl be on our website in the Support tab under RemoteCodes. We will also be sending out an email blast with the remote codes as soon as they're available. Again we appologise for inconvenience, and we appreciate your patience.
It sounds like there is no code yet for this TV. I will contact Westinghouse tomorrow the old fashioned way, by telephone, and get verification about this.
If anyone has the correct code
I wish you luck. But when I checked out the Westinghouse site all I saw were 4 digit codes listed for Comcast remotes. Probably for the old grey select button remote.
I tried the following toshiba codes and they did NOT work: 10060, 10154, 11256, 10156, 11265, 10650, 10845, 11156, 11356, 11656, 11704.
I first posted about this problem in 2010 and still have no answer.
COMCAST is a big disappointment.They have no code for this TV model. Unbelievable!!!!
Thanks for responding though.
This link is to the remote code chart from Westinghouse.
Also try 00627 or 10178 if you haven't. Not codes for you model exactly.
But looking at the codes chart it looks like Westinghouse never provided codes for anyone beyond their own remote. So the maker of the Comcast remote has little to go on.
Thanks Commonguy but the codes didn't work for this model. Back when I originally posted I didn't find the Westinghouse code for this specific model either and it sounds like they still don't have one years later. The codes "00627", "10178" and "00000" don't work either. WESTINGHOUSE SUCKS. I will never buy another Westinghouse TV no matter how cheap or better it might be compared to other brands. They have lost my business for good.
Oh that finds a code that will turn power on/off but not the other buttons - or at least not the ones you need to change the input source for example - or the TV menu. Frustrating!
Could everyone on this post clarify what has worked for them because with my 32" westinghouse TV and a Comcast remote I can not get any codes to work. I repeat, No matter how cheap the TV is, I will never buy another Westinghouse TV. Happy Holidays.
Have been frustrated with my lack of comcast capabilities with my westinghouse tv - Just for anyone's reference I used the 10000 code for that tv and it worked!! Thanks, I know this thread is for a 40 inch but if anyone has a 32 inch with the same issues - definitely try it!!
11577 worked for my 19". The Comcast remote didn't respond with the two blinks like it was supposed to but the code 11577 seems to work for all important functions like volume, power, and menu. Hope this helps someone ;-)
10178 . got it from White Westinghouse website, its the only code that worked. I tried all of the ones provided by comcast and they did not work. they need to add this one to their list. (I have the 40inch westinghouse flat screen tv
I have the same issues with both of my Westinghouse TV's. neither will hook up to Xinfinity niether Comcas or Westinghouse could help me
Lmcgmc -- Which remote do you have?
Topic now Closed.