Community Forum

Speed increase from 150 to 300. 2.4 seems stuck in the mud.

Xfinity Forum Archive
About the archive project

Xfinity Forum Archive...

This is an archived section of the community.

Content in this area has been identified as outdated or irrelevant.

This change was done in an effort to make the forum easier to use and to keep only the most helpful and recent content active.

Post your questions in the Xfinity Community

Frequent Visitor

Speed increase from 150 to 300. 2.4 seems stuck in the mud.

So this past Friday whilst inquiring about a rate increase my wife had our speed bumped from 150 to 300Mbps. Seemed to go smoothly modem retstarted, router restarted, devices restarted. Speed on ethernet anb 5Ghz top out at or above the 300 that was promised. However my 2.4 is incredibly slow when compared to those. Yes I know hard wired will always be faster as well as 5Ghz but this seems way out of proportion. The thing is I am in the room where the Gateway & router reside.

Gateway = Cisco DPC3941T, Router = Apple Airport Extreme connected vie Cat6 cable. I've tried a few different channels but that didn't help.This can't be normal can it? I have some screenshots to illustrate my point.Xfinity Speed Test Ethernet.pngEthernet5Ghz.jpg5Ghz2.4Ghz.jpg2.4Ghz

 

 

Silver Problem Solver

Re: Speed increase from 150 to 300. 2.4 seems stuck in the mud.

Wifi speeds are NEVER as fast as an ethernet connection and ethernet is what your speed tier is based on.

I am not a Comcast Employee.
I am just a customer, volunteering my time to help other customers here in the Forums.
Was your question answered? Mark the post as best answer!
Frequent Visitor

Re: Speed increase from 150 to 300. 2.4 seems stuck in the mud.

Thanks for the quick reply Robert. I realize the speed is based on ethernet. I also realize 5Ghz is always faster than 2.4 but I cannot believe that it should only be about 1/8 of that. Why would I get 300+ on my 5 and only 45 on the 2.4. Same room. I'll admit I am a network specialist but this seems like an awfully big difference. BTW I tested the wireless on an iPhone X so it's not as though I am using an older piece of equipment.

Expert

Re: Speed increase from 150 to 300. 2.4 seems stuck in the mud.

Well the 5 GHz is wireless AC and 20/40/80 MHz bandwidths while the 2.4 for most devices now mainly use Wireless-N at 20/40 MHz if you enable it. There’s a chance you might only be using 20MHz. FYI while I had that device before my 2.4 only topped off around 100 even on newer devices.

I am not a Comcast Employee.
I am a Customer Expert volunteering my time to help other customers here in the Forums.
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Mark the post as Best Answer!
Expert

Re: Speed increase from 150 to 300. 2.4 seems stuck in the mud.

Eh, that seems about normal in my experience. Typically the speeds are limited to some degree on the client side. I'm not familiar with Apple hardware, so I can only speculate. My Chromebook will do ~50Mbps on my 2.4 GHz network and ~300 on the 5GHz network. That seems pretty close to what you are seeing. You might want to consider posting on the Apple forums, they might have some suggestions for you specific to your hardware. 


I am not a Comcast Employee.
I am a Customer Expert volunteering my time to help other customers here in the Forums.
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Mark the post as Best Answer!
New Poster

Re: Speed increase from 150 to 300. 2.4 seems stuck in the mud.

Just Google 'max speed for 2.4 wifi' .   I think you'll find it ain't ever going to do much better than yours is doing.