Xfinity Forum Archive...
This is an archived section of the community.
Content in this area has been identified as outdated or irrelevant.
This change was done in an effort to make the forum easier to use and to keep only the most helpful and recent content active.
Post your questions in the Xfinity Community
O/k there are three additional signal stats that can cause problems which can't be read by the modem. They can only be read from their end by them polling the CMTS (Cable Modem Termination System) at the local headend facility.
They are the "Upstream Rx Power" (Upstream Receive Power Level), the "Upstream SNR Ch." (Upstream Signal To Noise Ratio), and the "Upstream ICFR" (In Channel Frequency Response). These are as equally important in diagnosing connectivity issues as are the modem's stats.
You can call in and ask what these figures are. The Upstream Receive Power Level should fall within the range of -2dB to +2dB with 0dB being in the middle and perfect.
The Upstream SNR should be least 31dB, and the higher it is the better.
The ICFR should be no higher than 2 dB.
You could have an intermittent noise ingress issue in only the upstream channel(s) / return path only somewhere.
They will be able to see whether or not everything is in the green zone and also see a history plot for the modem.
Correct. No router is involved. Sometimes when the "outage" occurs, before I reset the modem I notice that it says there is no internet connection and the light for the upload connection is blinking like when it is trying to connect. I have left it alone before to see if it would connect, but after 5 to 10 minutes of waiting I reset the modem and it connected right away. Other times when the "outage" occurs, all lights on the modem are solid like it is still connected to the internet.
The signal stats are good. You didn't specifically say that it was a WiFi connection, but if it is, as a test, does a computer that is hardwired directly to the router with an ethernet cable have the same problem ?
If it also has the same problem that way, then as a further test, try connecting directly to the TP-link modem (no router in the mix) and see.
Can we see the signal stats.
Please post the *Downstream Power Level*, the *Upstream Power Level*, and the *SNR* (Signal to Noise Ratio) numbers.
What is the exact make and model number of the modem ?
Is this with a WiFi connection ?
My internet connection will randomly drop throught the day/night time. This is very frustrating because every time it drops I have to go reset the modem to get it to work. This is a new house with a single (new) line running directly to the modem from the drop outside of the house. The specs of the modem are in line everytime I have checked them. Below is the system log from last night when the signal was dropped. Unplugged the cable from the modem and restarted the modem and it connected right up.