Welcome to Comcast Help & Support Forums
Find solutions, share knowledge, and get answers from customers and experts

New to the Community? Start here.

5,727,430

members

52

online now

1,889,346

discussions

Back to Top

Modem on Second floor

Posted by
New Poster
  • Congrats on Posting your first topic!

Message 1 of 6
1,181 Views

Im trying to relocate my modem to the second floor of my house.

However, whenver I connect it to the cable jacks upstairs only the Power, Ds, and Us lights light up and I have no connection the the internet. I took the the customer support rep and he said that their must be a alrge amount of splitters throughout my house and thus the signal is not strong enough to activate it when its on the second floor ( its currently in the basement) . I want to know if anyone knows a way around thisw that would enable me to connect it on the second floor. Thanks =)

5 REPLIES
Posted by
Networking Expert

Message 2 of 6
1,174 Views

Where-ever the cable enters the house at the first splitter, replace said splitter with a combined two-way amplifier splitter.  You can buy one at Radio Shack or Home Depot.

sam




Community Icon
I am not a Comcast employee, I am a paying customer just like you!
I am an XFINITY Forum Expert and I am here to help. For information on the program click here.
We ask that you post publicly so people with similar questions may benefit from the conversation.

Was your question answered? Mark it as an accepted solution!solution Icon
Community Icon
I am not a Comcast employee. I am a paying customer just like you!
I am an XFINITY Forum Expert and I am here to help.
We ask that you post publicly so people with similar questions may benefit.

Was your question answered? Mark it as an accepted solution!solution Icon
Community Icon
I am not a Comcast employee.

Was your question answered?
Mark it as a solution!solution Icon

Posted by
Connection Expert

Message 3 of 6
1,166 Views

I would never recommend amplifying a cable modem. And especially not with a consumer grade piece of garbage from Radio Shack...




Community Icon
I am not a Comcast employee, I am a paying customer just like you!
I am an XFINITY Forum Expert and I am here to help. For information on the program click here.
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Mark it as an accepted solution!solution Icon
Community Icon
I am not a Comcast employee. I am a paying customer just like you!
I am an XFINITY Forum Expert and I am here to help.
We ask that you post publicly so people with similar questions may benefit.
Was your question answered? Mark it as an accepted solution!solution Icon
Community Icon
I am not a Comcast employee.

Was your question answered?
Mark it as a solution!solution Icon

Posted by
Contributor

Message 4 of 6
1,154 Views

 


EG wrote:

I would never recommend amplifying a cable modem. And especially not with a consumer grade piece of garbage from Radio Shack...


But a decent amp like the Motorola Signal Booster works great. Assuming that low level due to splitters is the actual cause of the problem. The only caveat is that you need to be able to supply it power remotely via coax.

 

Posted by
Networking Expert

Message 5 of 6
1,144 Views

 


EG wrote:

I would never recommend amplifying a cable modem. And especially not with a consumer grade piece of garbage from Radio Shack...


 

Impolite response from a PE:

If it works like mine does, then provide a better solution!

sam




Community Icon
I am not a Comcast employee, I am a paying customer just like you!
I am an XFINITY Forum Expert and I am here to help. For information on the program click here.
We ask that you post publicly so people with similar questions may benefit from the conversation.

Was your question answered? Mark it as an accepted solution!solution Icon
Community Icon
I am not a Comcast employee. I am a paying customer just like you!
I am an XFINITY Forum Expert and I am here to help.
We ask that you post publicly so people with similar questions may benefit.

Was your question answered? Mark it as an accepted solution!solution Icon
Community Icon
I am not a Comcast employee.

Was your question answered?
Mark it as a solution!solution Icon

Posted by
Connection Expert

Message 6 of 6
1,135 Views

Dude... Amplifiying a modem is never the correct solution. It is nothing more than a band-aid fix and can amplify a crummy connection and noise actually making things worse. Yours is a individual example and not necessarily everyone else's unique environment. Correcting the real issue is the true solution. Get a clue. OP may need a tech to verify that the connection quality at that outlet is sufficient. If it is not, then the wiring needs to be checked by a pro and corrected if needed. The OP could try to check the signal levels if they can at that outlet with the modem. Some makes and models of modems need to be in block sync mode in order to be able to have access to their user interface pages so the end user may not be able to obtain them. This is why a tech may be needed with a SLM (Signal Level Meter) to see the connection quality at that outlet. Stay in your lane Sam...............




Community Icon
I am not a Comcast employee, I am a paying customer just like you!
I am an XFINITY Forum Expert and I am here to help. For information on the program click here.
We ask that you post publicly so people with similar questions may benefit from the conversation.
Was your question answered? Mark it as an accepted solution!solution Icon
Community Icon
I am not a Comcast employee. I am a paying customer just like you!
I am an XFINITY Forum Expert and I am here to help.
We ask that you post publicly so people with similar questions may benefit.
Was your question answered? Mark it as an accepted solution!solution Icon
Community Icon
I am not a Comcast employee.

Was your question answered?
Mark it as a solution!solution Icon